Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
ASUS ROG Strix RTX 4070 Ti 12GB triple-fan graphics card with diecast shroud and vented backplate

ASUS

ASUS ROG Strix GeForce RTX 4070 Ti 12G Gaming graphics card

SKU CH-X6EK-M0KB7

12 GB GDDR6X GPU with 7680 CUDA cores, 2610 MHz boost clock, triple-fan 3.15-slot cooler and HDMI 2.1a plus DisplayPort 1.4a outputs

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 40 Series
  • GPUGeForce RTX 4070 Ti
  • Core Clock2310 MHz
  • Boost Clock2610 MHz
  • DLSS 3 delivers up to four times rendering performance with fourth-generation Tensor Cores
  • Third-generation RT Cores provide up to two times ray tracing speed
  • Axial-tech fans move 31 percent more air for cooler operation
  • 15-slot heatsink and vented diecast frame maximise heat dissipation
  • 12 GB GDDR6X on a 192-bit bus enables 7680 x 4320 resolution

12GB GDDR6X PCIe 4.0 Graphics Card

The ASUS ROG Strix RTX 4070 Ti is a 12GB GDDR6X graphics card built on the NVIDIA Ada Lovelace architecture. It connects via a PCI Express 4.0 interface and delivers a boost clock of 2610 MHz with 7680 CUDA cores. The card targets gamers and creators who need high frame rates at 1440p or entry-level 4K.

Three Axial-tech fans with 3.15-slot cooler

The 3.15-slot design houses three Axial-tech fans scaled for 31 percent more airflow over a massive fin array. A diecast shroud, frame and vented backplate add rigidity while directing heat out of the chassis. Digital power control with high-current stages and 15K capacitors supports stable overclocking via GPU Tweak III software. Buyers with compact cases or limited clearance should verify the 3.15-slot thickness before ordering.

12GB memory on a 192-bit bus

The single specification that decides fit is the 12GB GDDR6X frame buffer on a 192-bit memory interface. This capacity and bus width determine texture headroom and bandwidth for modern titles at high resolution. If your workflow demands more video memory or a wider bus for heavy compute loads, a different tier is required.

Høydepunkter

  • DLSS 3 delivers up to four times rendering performance with fourth-generation Tensor Cores
  • Third-generation RT Cores provide up to two times ray tracing speed
  • Axial-tech fans move 31 percent more air for cooler operation
  • 15-slot heatsink and vented diecast frame maximise heat dissipation
  • 12 GB GDDR6X on a 192-bit bus enables 7680 x 4320 resolution

Spesifikasjoner

BrandASUS
SeriesROG
ModelROG-STRIX-RTX4070TI-12G-GAMING
Part Number90YV0II1-M0AA00
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 40 Series
GPUGeForce RTX 4070 Ti
Core Clock2310 MHz
Boost Clock2610 MHz
CUDA Cores7680
Memory Size12GB
Memory Interface192-Bit
Memory TypeGDDR6X
DirectXDirectX 12
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI 2.1a
DisplayPort3 x DisplayPort 1.4a
Max Resolution7680 x 4320
CoolerTriple Fans
Thermal Design Power285W
Recommended PSU Wattage750W
Power Connector1 x 16-Pin
HDCP ReadyYes
Form FactorATX
Max GPU Length336 mm
Slot Width3.15 Slot

Spørsmål om denne varen

How much clearance does the 3.15-slot design need in my case?

The card occupies 3.15 expansion slots, so verify your chassis can fit a triple-slot cooler with a massive fin array and three Axial-tech fans before purchase.

Which power connectors must I plug in during installation?

Connect the required PCIe power cables from your PSU to the card's onboard power stages; the digital power control uses high-current stages and 15K capacitors, so ensure every connector seats fully to avoid boot issues.

When should I replace the thermal interface material on this GPU?

Re-paste the die and memory pads only if temperatures rise noticeably after several years; the diecast shroud, frame, and backplate add rigidity, so disassembly requires care to avoid bending the vented metal.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.