Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
ASUS ROG Strix RTX 4070 Ti 12GB triple-fan graphics card with diecast shroud and vented backplate

ASUS

ASUS ROG Strix GeForce RTX 4070 Ti 12G Gaming graphics card

SKU CH-X6EK-M0KB7

12 GB GDDR6X GPU with 7680 CUDA cores, 2610 MHz boost clock, triple-fan 3.15-slot cooler and HDMI 2.1a plus DisplayPort 1.4a outputs

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 40 Series
  • GPUGeForce RTX 4070 Ti
  • Core Clock2310 MHz
  • Boost Clock2610 MHz
  • DLSS 3 delivers up to four times rendering performance with fourth-generation Tensor Cores
  • Third-generation RT Cores provide up to two times ray tracing speed
  • Axial-tech fans move 31 percent more air for cooler operation
  • 15-slot heatsink and vented diecast frame maximise heat dissipation
  • 12 GB GDDR6X on a 192-bit bus enables 7680 x 4320 resolution

12GB GDDR6X PCIe 4.0 Graphics Card

The ASUS ROG Strix RTX 4070 Ti is a 12GB GDDR6X graphics card built on the NVIDIA Ada Lovelace architecture. It connects via a PCI Express 4.0 interface and delivers a boost clock of 2610 MHz with 7680 CUDA cores. The card targets gamers and creators who need high frame rates at 1440p or entry-level 4K.

Three Axial-tech fans with 3.15-slot cooler

The 3.15-slot design houses three Axial-tech fans scaled for 31 percent more airflow over a massive fin array. A diecast shroud, frame and vented backplate add rigidity while directing heat out of the chassis. Digital power control with high-current stages and 15K capacitors supports stable overclocking via GPU Tweak III software. Buyers with compact cases or limited clearance should verify the 3.15-slot thickness before ordering.

12GB memory on a 192-bit bus

The single specification that decides fit is the 12GB GDDR6X frame buffer on a 192-bit memory interface. This capacity and bus width determine texture headroom and bandwidth for modern titles at high resolution. If your workflow demands more video memory or a wider bus for heavy compute loads, a different tier is required.

Kohokohdat

  • DLSS 3 delivers up to four times rendering performance with fourth-generation Tensor Cores
  • Third-generation RT Cores provide up to two times ray tracing speed
  • Axial-tech fans move 31 percent more air for cooler operation
  • 15-slot heatsink and vented diecast frame maximise heat dissipation
  • 12 GB GDDR6X on a 192-bit bus enables 7680 x 4320 resolution

Tekniset tiedot

BrandASUS
SeriesROG
ModelROG-STRIX-RTX4070TI-12G-GAMING
Part Number90YV0II1-M0AA00
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 40 Series
GPUGeForce RTX 4070 Ti
Core Clock2310 MHz
Boost Clock2610 MHz
CUDA Cores7680
Memory Size12GB
Memory Interface192-Bit
Memory TypeGDDR6X
DirectXDirectX 12
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI 2.1a
DisplayPort3 x DisplayPort 1.4a
Max Resolution7680 x 4320
CoolerTriple Fans
Thermal Design Power285W
Recommended PSU Wattage750W
Power Connector1 x 16-Pin
HDCP ReadyYes
Form FactorATX
Max GPU Length336 mm
Slot Width3.15 Slot

Kysymyksiä tästä tuotteesta

How much clearance does the 3.15-slot design need in my case?

The card occupies 3.15 expansion slots, so verify your chassis can fit a triple-slot cooler with a massive fin array and three Axial-tech fans before purchase.

Which power connectors must I plug in during installation?

Connect the required PCIe power cables from your PSU to the card's onboard power stages; the digital power control uses high-current stages and 15K capacitors, so ensure every connector seats fully to avoid boot issues.

When should I replace the thermal interface material on this GPU?

Re-paste the die and memory pads only if temperatures rise noticeably after several years; the diecast shroud, frame, and backplate add rigidity, so disassembly requires care to avoid bending the vented metal.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.