Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Black enclosed CoreXY 3D printer with four-spool AMS unit on top

Bambu Lab

Bambu Lab P1S Combo Enclosed CoreXY 3D Printer with AMS

SKU CH-KB1W-8A099

Enclosed CoreXY FDM printer with a four-spool AMS for multi-material prints, 256 mm³ build volume, 500 mm/s speed and 20 000 mm/s² acceleration

  • ColorBlack
  • TechnologyFDM (Fused Deposition Modeling)
  • Enclosed CoreXY frame keeps temperatures stable for ABS and ASA
  • 4-spool AMS enables multi-colour prints and automatic filament changes
  • 500 mm/s tool-head speed with 20 000 mm/s² acceleration finishes a benchy in 18 minutes
  • 256 × 256 × 256 mm build volume fits large single parts
  • Hot end reaches 300 °C and bed 100 °C for broad material support

Enclosed CoreXY 3D Printer with AMS

The Bambu Lab P1S Combo is a new fused deposition modeling printer built on a CoreXY motion system inside a fully enclosed frame. It ships with a four-spool Automatic Material System that mounts on top of the machine and feeds filament directly to the tool head. The combination targets makers who want multi-material capability without adding external hardware.

Makers needing multi-filament workflows.

The bundled AMS handles up to four spools with widths from 50 to 68 millimetres and diameters from 197 to 202 millimetres, enabling automatic colour changes and filament run-out recovery. The hot end reaches 300 degrees Celsius and the heated bed 100 degrees Celsius, supporting PLA, PETG, TPU, PVA, PET, ABS and ASA as ideal materials plus PA and PC as capable options. Carbon or glass fibre reinforced polymers are not compatible, so users printing those composites should look elsewhere.

Four-spool AMS enables unattended material switching

The included Automatic Material System stores four spools simultaneously and selects them during a print, removing manual swap time for multi-colour or multi-material jobs. An activated carbon air filter is built into the enclosure to manage odours and particulates from materials such as ABS and ASA. Connectivity options include Wi-Fi, Bluetooth and Bambu-Bus for integration with the manufacturer's ecosystem. A 69 millimetre colour display and a micro SD card slot provide local control and offline printing.

Høydepunkter

  • Enclosed CoreXY frame keeps temperatures stable for ABS and ASA
  • 4-spool AMS enables multi-colour prints and automatic filament changes
  • 500 mm/s tool-head speed with 20 000 mm/s² acceleration finishes a benchy in 18 minutes
  • 256 × 256 × 256 mm build volume fits large single parts
  • Hot end reaches 300 °C and bed 100 °C for broad material support

Spesifikasjoner

BrandBambu Lab
SeriesP1S
ModelP1S Combo Enclosed CoreXY 3D Printer w/ AMS
Part NumberPF001-U+SA001-US
ColorBlack
TechnologyFDM (Fused Deposition Modeling)

Spørsmål om denne varen

What spool dimensions does the included AMS accept for the four filament rolls?

The AMS fits spools 50 to 68 mm wide and 197 to 202 mm in diameter.

Will the printer work with the PLA and PETG spools I already have?

Yes, PLA, PETG, TPU, PVA, PET, ABS and ASA are all listed as ideal filaments.

How can I confirm the motion controller is running after power-on?

The 69 mm colour display lights up and shows the printer interface when the dual-core Cortex-M4 controller starts.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.