Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black enclosed CoreXY 3D printer with four-spool AMS unit on top

Bambu Lab

Bambu Lab P1S Combo Enclosed CoreXY 3D Printer with AMS

SKU CH-KB1W-8A099

Enclosed CoreXY FDM printer with a four-spool AMS for multi-material prints, 256 mm³ build volume, 500 mm/s speed and 20 000 mm/s² acceleration

  • ColorBlack
  • TechnologyFDM (Fused Deposition Modeling)
  • Enclosed CoreXY frame keeps temperatures stable for ABS and ASA
  • 4-spool AMS enables multi-colour prints and automatic filament changes
  • 500 mm/s tool-head speed with 20 000 mm/s² acceleration finishes a benchy in 18 minutes
  • 256 × 256 × 256 mm build volume fits large single parts
  • Hot end reaches 300 °C and bed 100 °C for broad material support

Enclosed CoreXY 3D Printer with AMS

The Bambu Lab P1S Combo is a new fused deposition modeling printer built on a CoreXY motion system inside a fully enclosed frame. It ships with a four-spool Automatic Material System that mounts on top of the machine and feeds filament directly to the tool head. The combination targets makers who want multi-material capability without adding external hardware.

Makers needing multi-filament workflows.

The bundled AMS handles up to four spools with widths from 50 to 68 millimetres and diameters from 197 to 202 millimetres, enabling automatic colour changes and filament run-out recovery. The hot end reaches 300 degrees Celsius and the heated bed 100 degrees Celsius, supporting PLA, PETG, TPU, PVA, PET, ABS and ASA as ideal materials plus PA and PC as capable options. Carbon or glass fibre reinforced polymers are not compatible, so users printing those composites should look elsewhere.

Four-spool AMS enables unattended material switching

The included Automatic Material System stores four spools simultaneously and selects them during a print, removing manual swap time for multi-colour or multi-material jobs. An activated carbon air filter is built into the enclosure to manage odours and particulates from materials such as ABS and ASA. Connectivity options include Wi-Fi, Bluetooth and Bambu-Bus for integration with the manufacturer's ecosystem. A 69 millimetre colour display and a micro SD card slot provide local control and offline printing.

Pluspunten

  • Enclosed CoreXY frame keeps temperatures stable for ABS and ASA
  • 4-spool AMS enables multi-colour prints and automatic filament changes
  • 500 mm/s tool-head speed with 20 000 mm/s² acceleration finishes a benchy in 18 minutes
  • 256 × 256 × 256 mm build volume fits large single parts
  • Hot end reaches 300 °C and bed 100 °C for broad material support

Specificaties

BrandBambu Lab
SeriesP1S
ModelP1S Combo Enclosed CoreXY 3D Printer w/ AMS
Part NumberPF001-U+SA001-US
ColorBlack
TechnologyFDM (Fused Deposition Modeling)

Vragen over dit artikel

What spool dimensions does the included AMS accept for the four filament rolls?

The AMS fits spools 50 to 68 mm wide and 197 to 202 mm in diameter.

Will the printer work with the PLA and PETG spools I already have?

Yes, PLA, PETG, TPU, PVA, PET, ABS and ASA are all listed as ideal filaments.

How can I confirm the motion controller is running after power-on?

The 69 mm colour display lights up and shows the printer interface when the dual-core Cortex-M4 controller starts.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.