Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Raspberry Pi Compute Module 4 board with heatsink and antenna kit

BFKK

BFKK Raspberry Pi CM4104016 4GB 16GB eMMC Heatsink Kit

SKU CH-F6FN-69NZ9

Includes a Compute Module 4 with 4 GB RAM, 16 GB eMMC and wireless, plus an antenna kit and heatsink

  • CPU TypeOther
  • Official Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC
  • Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5GHz
  • Onboard Gigabit Ethernet PHY supporting IEEE1588 for precise network timing
  • PCIe Gen 2 x1 interface enables connection of additional expansion modules
  • B-to-B connectors provide more stable connection than previous Goldfinger edge design

BFKK CM4104016 Compute Module Kit

The BFKK kit delivers a Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC flash plus wireless connectivity, an antenna kit and a heatsink. It uses a Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC running at 1.5GHz. The board adopts B-to-B connectors for improved stability over earlier edge-connector designs.

Makers needing compact wireless compute

Engineers building embedded appliances, industrial gateways or cluster nodes will appreciate the onboard Gigabit Ethernet PHY with IEEE1588 support and the PCIe Gen 2 x1 interface for expansion modules. Buyers who need more than 4GB RAM or larger onboard storage should look at alternative modules. Projects without space for a heatsink or antenna may find the kit excessive.

4GB RAM and 16GB eMMC decide fit

The fixed 4GB memory and 16GB eMMC capacity determine whether the module meets your application's runtime and storage requirements. The 1.5GHz quad-core Cortex-A72 processor and PCIe Gen 2 x1 lane support peripheral additions. Verify that these specifications match your workload before purchase.

Høydepunkter

  • Official Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC
  • Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5GHz
  • Onboard Gigabit Ethernet PHY supporting IEEE1588 for precise network timing
  • PCIe Gen 2 x1 interface enables connection of additional expansion modules
  • B-to-B connectors provide more stable connection than previous Goldfinger edge design

Spesifikasjoner

CPU TypeOther

Spørsmål om denne varen

Will the BCM2711 processor throttle under continuous 1.5GHz load?

The quad-core Cortex-A72 SoC runs at 1.5GHz; sustained workloads may trigger thermal limits unless the included heatsink provides adequate dissipation.

How loud or hot does the module get when running 24/7 with the supplied heatsink?

No active fan is included; the passive heatsink handles typical loads, but prolonged high utilisation can raise surface temperature noticeably.

What carrier board is required to use the CM4104016 module, antenna kit and heatsink?

The module uses a B-to-B connector and needs a compatible carrier board with PCIe Gen 2 x1 and Gigabit Ethernet PHY support.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.