Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Raspberry Pi Compute Module 4 board with heatsink and antenna kit

BFKK

BFKK Raspberry Pi CM4104016 4GB 16GB eMMC Heatsink Kit

SKU CH-F6FN-69NZ9

Includes a Compute Module 4 with 4 GB RAM, 16 GB eMMC and wireless, plus an antenna kit and heatsink

  • CPU TypeOther
  • Official Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC
  • Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5GHz
  • Onboard Gigabit Ethernet PHY supporting IEEE1588 for precise network timing
  • PCIe Gen 2 x1 interface enables connection of additional expansion modules
  • B-to-B connectors provide more stable connection than previous Goldfinger edge design

BFKK CM4104016 Compute Module Kit

The BFKK kit delivers a Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC flash plus wireless connectivity, an antenna kit and a heatsink. It uses a Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC running at 1.5GHz. The board adopts B-to-B connectors for improved stability over earlier edge-connector designs.

Makers needing compact wireless compute

Engineers building embedded appliances, industrial gateways or cluster nodes will appreciate the onboard Gigabit Ethernet PHY with IEEE1588 support and the PCIe Gen 2 x1 interface for expansion modules. Buyers who need more than 4GB RAM or larger onboard storage should look at alternative modules. Projects without space for a heatsink or antenna may find the kit excessive.

4GB RAM and 16GB eMMC decide fit

The fixed 4GB memory and 16GB eMMC capacity determine whether the module meets your application's runtime and storage requirements. The 1.5GHz quad-core Cortex-A72 processor and PCIe Gen 2 x1 lane support peripheral additions. Verify that these specifications match your workload before purchase.

I korthet

  • Official Raspberry Pi CM4104016 module with 4GB RAM and 16GB eMMC
  • Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5GHz
  • Onboard Gigabit Ethernet PHY supporting IEEE1588 for precise network timing
  • PCIe Gen 2 x1 interface enables connection of additional expansion modules
  • B-to-B connectors provide more stable connection than previous Goldfinger edge design

Specifikationer

CPU TypeOther

Frågor om den här produkten

Will the BCM2711 processor throttle under continuous 1.5GHz load?

The quad-core Cortex-A72 SoC runs at 1.5GHz; sustained workloads may trigger thermal limits unless the included heatsink provides adequate dissipation.

How loud or hot does the module get when running 24/7 with the supplied heatsink?

No active fan is included; the passive heatsink handles typical loads, but prolonged high utilisation can raise surface temperature noticeably.

What carrier board is required to use the CM4104016 module, antenna kit and heatsink?

The module uses a B-to-B connector and needs a compatible carrier board with PCIe Gen 2 x1 and Gigabit Ethernet PHY support.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.