Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P03051-191 16GB DDR4-2933 1Rx4 Registered ECC server RAM

SKU CH-4R3E-YHJEK

16 GB registered ECC DDR4-2933 module with 1Rx4 organisation, 288 pins and 1.2 V operation for HPE-compatible servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • HPE P03051-191 equivalent for drop-in server upgrades
  • 16 GB DDR4-2933 registered ECC for data integrity
  • 1Rx4 single-rank layout for broad platform compatibility
  • 2 V operation lowers power draw per module
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

HPE-compatible 16 GB DDR4-2933 registered ECC

This 16 GB DDR4-2933 module is built for servers that require registered ECC memory. It targets administrators maintaining HPE platforms who need validated compatibility without OEM pricing. The 1Rx4 organisation and 1.2 V operation match the original specification exactly.

Capacity and headroom at DDR4-2933

A single 16 GB stick adds substantial capacity to multi-slot servers running virtualisation or database workloads. The PC4-23400 rating delivers 2933 MT/s bandwidth, while registered buffering preserves signal integrity across full DIMM populations. Systems needing more than the installed slot count can support will require higher-density modules.

Major-brand chips and 288-pin registered build

Modules ship with Samsung, SK Hynix or Micron components and carry a lifetime warranty from the supplier. The 288-pin registered DIMM form factor fits standard DDR4 server slots and maintains factory warranty coverage on the host platform. Buyers needing unbuffered UDIMMs or non-ECC memory for workstation boards cannot use this module.

Høydepunkter

  • HPE P03051-191 equivalent for drop-in server upgrades
  • 16 GB DDR4-2933 registered ECC for data integrity
  • 1Rx4 single-rank layout for broad platform compatibility
  • 2 V operation lowers power draw per module
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

Spesifikasjoner

BrandHPE
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Spørsmål om denne varen

Will the 2933 MHz DDR4 modules operate correctly alongside my existing registered ECC memory?

These modules run at DDR4-2933 (PC4-23400) with 1.20 V and registered ECC. The server memory controller sets a single speed for all populated slots, so matching speed, voltage, rank and ECC type across channels avoids downclocking or instability.

How can I verify the 16 GB DDR4-2933 1Rx4 registered ECC module is recognised and running at the correct speed after installation?

Enter the system BIOS or UEFI and check the memory configuration screen; it should show 16 GB per module, DDR4-2933 (PC4-23400), 1Rx4 organisation, registered ECC enabled and 1.20 V operating voltage.

What is included with the P03051-191 16 GB DDR4-2933 1Rx4 registered ECC module and what must be sourced separately?

The box contains the 288-pin DDR4 SDRAM module only. Any additional DIMMs, memory risers, cooling shrouds or server-specific brackets required for your platform are not included and must be obtained separately.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.