Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P03051-191 16GB DDR4-2933 1Rx4 Registered ECC server RAM

SKU CH-4R3E-YHJEK

16 GB registered ECC DDR4-2933 module with 1Rx4 organisation, 288 pins and 1.2 V operation for HPE-compatible servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • HPE P03051-191 equivalent for drop-in server upgrades
  • 16 GB DDR4-2933 registered ECC for data integrity
  • 1Rx4 single-rank layout for broad platform compatibility
  • 2 V operation lowers power draw per module
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

HPE-compatible 16 GB DDR4-2933 registered ECC

This 16 GB DDR4-2933 module is built for servers that require registered ECC memory. It targets administrators maintaining HPE platforms who need validated compatibility without OEM pricing. The 1Rx4 organisation and 1.2 V operation match the original specification exactly.

Capacity and headroom at DDR4-2933

A single 16 GB stick adds substantial capacity to multi-slot servers running virtualisation or database workloads. The PC4-23400 rating delivers 2933 MT/s bandwidth, while registered buffering preserves signal integrity across full DIMM populations. Systems needing more than the installed slot count can support will require higher-density modules.

Major-brand chips and 288-pin registered build

Modules ship with Samsung, SK Hynix or Micron components and carry a lifetime warranty from the supplier. The 288-pin registered DIMM form factor fits standard DDR4 server slots and maintains factory warranty coverage on the host platform. Buyers needing unbuffered UDIMMs or non-ECC memory for workstation boards cannot use this module.

Kohokohdat

  • HPE P03051-191 equivalent for drop-in server upgrades
  • 16 GB DDR4-2933 registered ECC for data integrity
  • 1Rx4 single-rank layout for broad platform compatibility
  • 2 V operation lowers power draw per module
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

Tekniset tiedot

BrandHPE
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Kysymyksiä tästä tuotteesta

Will the 2933 MHz DDR4 modules operate correctly alongside my existing registered ECC memory?

These modules run at DDR4-2933 (PC4-23400) with 1.20 V and registered ECC. The server memory controller sets a single speed for all populated slots, so matching speed, voltage, rank and ECC type across channels avoids downclocking or instability.

How can I verify the 16 GB DDR4-2933 1Rx4 registered ECC module is recognised and running at the correct speed after installation?

Enter the system BIOS or UEFI and check the memory configuration screen; it should show 16 GB per module, DDR4-2933 (PC4-23400), 1Rx4 organisation, registered ECC enabled and 1.20 V operating voltage.

What is included with the P03051-191 16 GB DDR4-2933 1Rx4 registered ECC module and what must be sourced separately?

The box contains the 288-pin DDR4 SDRAM module only. Any additional DIMMs, memory risers, cooling shrouds or server-specific brackets required for your platform are not included and must be obtained separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.