Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green circuit board with four red SATA ports and silver PCIe connector

GLOTRENDS

GLOTRENDS SA3034A 4-Port PCIe SATA 3.0 Expansion Card

SKU CH-W4Y2-274GZ MPN SA3034A

Adds four SATA 3.0 ports via a PCIe 3.0 x1 slot, includes cables and a 1:5 power splitter, and supports OS boot on port one

  • TypePCI Express to SATA Card

Option 4-Port, X1

Overstrøkne versjoner finnes, men er ikke på lager her.

  • Add four SATA III 6 Gbps ports via a single PCIe 3.0 x1 slot
  • Each downstream port delivers up to 207.5 MB/s throughput on the ASM1064 controller
  • Port 1 supports OS boot for Windows, Linux, Mac OS and NAS systems
  • Four red LEDs show power and read/write activity per drive
  • Includes four 350 mm SATA cables, a 1:5 power splitter and both low-profile and full-height brackets

Product Identification

The GLOTRENDS SA3034A is a PCI Express 3.0 x1 add-in card that adds four SATA III 6 Gbps ports to a desktop or server. It uses the ASM1064 controller and operates in AHCI mode.

Target Builder

This card suits builders who need to connect up to four SATA hard drives or SSDs simultaneously for a storage pool or software RAID. It includes two brackets for standard and low-profile slots, plus four SATA cables and a 1:5 SATA power splitter. Systems without a free PCIe x1 slot or buyers who require hardware RAID cannot use this card.

Deciding Specification

Only the first SATA port supports operating-system booting; the remaining three ports are limited to data storage. If the build requires booting from any drive beyond the first port, this card will not meet that requirement.

Høydepunkter

  • Add four SATA III 6 Gbps ports via a single PCIe 3.0 x1 slot
  • Each downstream port delivers up to 207.5 MB/s throughput on the ASM1064 controller
  • Port 1 supports OS boot for Windows, Linux, Mac OS and NAS systems
  • Four red LEDs show power and read/write activity per drive
  • Includes four 350 mm SATA cables, a 1:5 power splitter and both low-profile and full-height brackets

Spesifikasjoner

TypePCI Express to SATA Card

Andre versjoner av denne modellen

2 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What slot size and brackets are required to install the SA3034A card?

The card uses a PCI-Express 3.0 X1 slot and ships with both a 12cm regular-profile bracket and an 8cm low-profile bracket for different case heights.

Which driver step is needed for Windows 7 and where is it found?

Windows 7 requires a manual driver reinstall; the download link is in the supplied manual.

What power cable is included for the four SATA drives and how many connectors does it provide?

A 1:5 SATA splitter power cable is included, giving five power connectors for the drives.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.