Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with four red SATA ports and silver PCIe connector

GLOTRENDS

GLOTRENDS SA3034A 4-Port PCIe SATA 3.0 Expansion Card

SKU CH-W4Y2-274GZ MPN SA3034A

Adds four SATA 3.0 ports via a PCIe 3.0 x1 slot, includes cables and a 1:5 power splitter, and supports OS boot on port one

  • TypePCI Express to SATA Card

Option 4-Port, X1

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Add four SATA III 6 Gbps ports via a single PCIe 3.0 x1 slot
  • Each downstream port delivers up to 207.5 MB/s throughput on the ASM1064 controller
  • Port 1 supports OS boot for Windows, Linux, Mac OS and NAS systems
  • Four red LEDs show power and read/write activity per drive
  • Includes four 350 mm SATA cables, a 1:5 power splitter and both low-profile and full-height brackets

Product Identification

The GLOTRENDS SA3034A is a PCI Express 3.0 x1 add-in card that adds four SATA III 6 Gbps ports to a desktop or server. It uses the ASM1064 controller and operates in AHCI mode.

Target Builder

This card suits builders who need to connect up to four SATA hard drives or SSDs simultaneously for a storage pool or software RAID. It includes two brackets for standard and low-profile slots, plus four SATA cables and a 1:5 SATA power splitter. Systems without a free PCIe x1 slot or buyers who require hardware RAID cannot use this card.

Deciding Specification

Only the first SATA port supports operating-system booting; the remaining three ports are limited to data storage. If the build requires booting from any drive beyond the first port, this card will not meet that requirement.

Poudarki

  • Add four SATA III 6 Gbps ports via a single PCIe 3.0 x1 slot
  • Each downstream port delivers up to 207.5 MB/s throughput on the ASM1064 controller
  • Port 1 supports OS boot for Windows, Linux, Mac OS and NAS systems
  • Four red LEDs show power and read/write activity per drive
  • Includes four 350 mm SATA cables, a 1:5 power splitter and both low-profile and full-height brackets

Specifikacije

TypePCI Express to SATA Card

Druge različice tega modela

še 2 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What slot size and brackets are required to install the SA3034A card?

The card uses a PCI-Express 3.0 X1 slot and ships with both a 12cm regular-profile bracket and an 8cm low-profile bracket for different case heights.

Which driver step is needed for Windows 7 and where is it found?

Windows 7 requires a manual driver reinstall; the download link is in the supplied manual.

What power cable is included for the four SATA drives and how many connectors does it provide?

A 1:5 SATA splitter power cable is included, giving five power connectors for the drives.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.