Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

HANNORD

HANNORD M.2 NVMe SATA USB 3.1 Type-C Thunderbolt 3 Black drive enclosure

SKU CH-AP31-4N6MV

M.2 NVMe and SATA SSD enclosure with USB 3.1 Type-C and Thunderbolt 3 reaching 10 Gbps for 2230, 2242, 2260, 2280 and 22110 drives

  • ColorBlack
  • Thunderbolt 3Yes
  • External InterfaceUSB 3.1 Type-C
  • Reads NVMe and SATA M.2 drives from 2230 to 22110
  • Up to 10 Gbps with NVMe SSDs over USB 3.1
  • Works with Windows, macOS, Linux and Android devices
  • Tool-free installation with both USB-A and USB-C cables included
  • Thunderbolt 3 compatible for enhanced performance on supported hosts

M.2 NVMe and SATA Enclosure

The HANNORD enclosure connects M.2 NVMe and SATA SSDs to a host device through a USB 3.1 Type-C port with Thunderbolt 3 support. It accepts drive lengths of 2230, 2242, 2260, 2280 and 22110 and works with M key as well as B+M key modules. The black plastic housing requires no tools for drive installation and includes both USB-A and USB-C cables for immediate use.

Suits portable data access.

This adapter is built for users who need to read or write NVMe and SATA M.2 drives across Windows, macOS, Linux and Android devices such as laptops, phones, tablets and smart TVs. It does not support M.2 SATA AHCI B-key SSDs and cannot accommodate drives fitted with heatsinks. Buyers who require those specific drive types should look at a different enclosure.

10 Gbps peak throughput via USB 3.1 Gen 2

With an NVMe SSD the enclosure reaches up to 10 Gbps, while SATA SSDs operate at 6 Gbps over the same USB 3.1 Gen 2 connection. Thunderbolt 3 compatibility provides an additional high-speed pathway for supported hosts. Drive temperatures can exceed 60°C during sustained transfers, so direct contact should be avoided.

Høydepunkter

  • Reads NVMe and SATA M.2 drives from 2230 to 22110
  • Up to 10 Gbps with NVMe SSDs over USB 3.1
  • Works with Windows, macOS, Linux and Android devices
  • Tool-free installation with both USB-A and USB-C cables included
  • Thunderbolt 3 compatible for enhanced performance on supported hosts

Spesifikasjoner

BrandHANNORD
ColorBlack
Thunderbolt 3Yes
External InterfaceUSB 3.1 Type-C

Spørsmål om denne varen

What real-world speed will I see from the 10 Gbps NVMe rating when the enclosure is connected to a USB 3.1 Type-C port?

The 10 Gbps figure is the USB 3.1 Gen 2 ceiling for NVMe drives; actual throughput depends on the SSD and host controller but will not exceed that limit.

Does the Thunderbolt 3 support change the 10 Gbps USB 3.1 Gen 2 cap for NVMe drives?

Thunderbolt 3 provides the same 10 Gbps NVMe ceiling over the USB-C connection; it does not raise the transfer limit beyond USB 3.1 Gen 2.

Will a 2280 NVMe stick with a factory heatsink fit inside the plastic shell?

No — the enclosure does not support M.2 SSDs with heatsinks, so a 2280 drive must be bare to install.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.