Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two blue desktop RAM sticks with asymmetric aluminium heat spreaders, dual-channel kit

HyperX

HyperX FURY HX316C10FK2/16 16GB (2 x 8GB) DDR3 1600 desktop RAM

SKU CH-K7YX-V7R2S MPN HX316C10FK2/16

Dual-channel 16 GB DDR3 kit running at 1600 MHz with CL10 timing and automatic overclocking to 1866 MHz

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL10
  • Timing10-10-10
  • Voltage1.50V
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • Auto-overclocking up to 1866MHz for faster plug-and-play performance
  • Low 1.35V operation reduces power draw and heat
  • CL10 10-10-10 timing at 1600MHz delivers responsive desktop speed
  • Dual-channel 16GB kit (2 x 8GB) doubles memory bandwidth
  • Blue aluminum heat spreader with asymmetric design improves cooling and style

FURY 16GB DDR3 1600 kit

This HyperX FURY kit delivers 16GB of DDR3 desktop memory in a matched pair of 8GB modules rated at 1600MHz with CL10 timing. It targets system builders and upgraders who want a straightforward dual-channel configuration for older platforms that still rely on DDR3 technology.

Blue heat spreader and dual-channel layout

Each module carries an asymmetric blue aluminum heat spreader over a black PCB, designed to move heat away from the DRAM without blocking adjacent slots. The unbuffered DIMMs follow the standard 240-pin layout, so they drop into any desktop board wired for DDR3 and enable dual-channel bandwidth when both sticks are populated.

Low-voltage operation and automatic overclocking

Rated at 1.50V within the JEDEC 1.425V–1.575V range, the kit also supports a 1.35V low-voltage mode that reduces power draw and heat output during everyday workloads. An automatic overclocking function can raise the data rate to 1866MHz on compatible hardware, providing extra throughput without manual BIOS tuning.

Høydepunkter

  • Auto-overclocking up to 1866MHz for faster plug-and-play performance
  • Low 1.35V operation reduces power draw and heat
  • CL10 10-10-10 timing at 1600MHz delivers responsive desktop speed
  • Dual-channel 16GB kit (2 x 8GB) doubles memory bandwidth
  • Blue aluminum heat spreader with asymmetric design improves cooling and style

Spesifikasjoner

BrandHyperX
SeriesFURY
ModelHX316C10FK2/16
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL10
Timing10-10-10
Voltage1.50V
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlue
Heat SpreaderYes
FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL-2, or CL-1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm +/- 1%)
On Die Terminat
Fraktvekt0.10 kg
Pakkestørrelse151 × 91 × 14 mm

Andre versjoner av denne modellen

2 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.