Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

KHACHIMO

KHACHIMO ATX power supply 27V 22.2A 600W 80 PLUS Gold

SKU CH-MTG0-M8KXS

Delivers 600 W at 27 V and 22.2 A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power operation

  • TypeATX
  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

27 V ATX power supply

This KHACHIMO unit delivers a single 27 V rail rated at 22.2 A for 600 W total output. It carries 80 PLUS Gold certification and uses resonant LLC topology with DC-to-DC conversion. Modern Standby compatibility and a zero-RPM fan mode keep the system quiet at low loads.

Suited for industrial or specialised builds

Designed for equipment that requires a dedicated 27 V source, such as certain embedded or industrial systems. It is not for standard desktop PCs that need the conventional multi-voltage ATX pinout.

27 V 22.2 A single-rail output

The defining specification is the fixed 27 V rail providing up to 22.2 A. Only choose this supply if your hardware explicitly demands that exact voltage and current combination.

Høydepunkter

  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

Spesifikasjoner

TypeATX

Spørsmål om denne varen

How do I install the KHACHIMO ATX power supply and what step is often missed?

Mount the unit in a standard ATX case using four screws, connect the 24-pin motherboard and CPU power cables, then verify the power switch is set to 27 V before first boot.

What maintenance or replacement will this 600 W supply need later?

The Zero RPM fan mode keeps the fan off at low and medium loads; clean dust from the intake vents annually and replace the fan only if bearing noise appears after extended high-load use.

What limit appears first during sustained full-load operation?

Continuous output is capped at 600 W with 22.2 A on the 27 V rail; exceeding either value triggers over-current protection and shuts the unit down.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.