Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

KHACHIMO

KHACHIMO ATX power supply 27V 22.2A 600W 80 PLUS Gold

SKU CH-MTG0-M8KXS

Delivers 600 W at 27 V and 22.2 A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for silent, low-power operation

  • TypeATX
  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

27 V ATX power supply

This KHACHIMO unit delivers a single 27 V rail rated at 22.2 A for 600 W total output. It carries 80 PLUS Gold certification and uses resonant LLC topology with DC-to-DC conversion. Modern Standby compatibility and a zero-RPM fan mode keep the system quiet at low loads.

Suited for industrial or specialised builds

Designed for equipment that requires a dedicated 27 V source, such as certain embedded or industrial systems. It is not for standard desktop PCs that need the conventional multi-voltage ATX pinout.

27 V 22.2 A single-rail output

The defining specification is the fixed 27 V rail providing up to 22.2 A. Only choose this supply if your hardware explicitly demands that exact voltage and current combination.

I korthet

  • Fast wake from sleep with Modern Standby support
  • High efficiency cuts consumption with 80 PLUS Gold
  • Silent operation at low load via Zero RPM fan
  • Clean, stable power from LLC resonant topology
  • Delivers 600 W at 27 V and 22.2 A

Specifikationer

TypeATX

Frågor om den här produkten

How do I install the KHACHIMO ATX power supply and what step is often missed?

Mount the unit in a standard ATX case using four screws, connect the 24-pin motherboard and CPU power cables, then verify the power switch is set to 27 V before first boot.

What maintenance or replacement will this 600 W supply need later?

The Zero RPM fan mode keeps the fan off at low and medium loads; clean dust from the intake vents annually and replace the fan only if bearing noise appears after extended high-load use.

What limit appears first during sustained full-load operation?

Continuous output is capped at 600 W with 22.2 A on the 27 V rail; exceeding either value triggers over-current protection and shuts the unit down.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.