KingSpec
KingSpec VP14000 2TB PCIe 5.0 x4 M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
292,99 USD
0.00366632BTC
På lager
KingSpec
KingSpec VP14000 1TB internal SSD
PCIe 5.0 M.2 2280 drive with sequential reads up to 14349 MBps and writes up to 8957 MBps for AI, gaming and heavy workloads
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 5.0 x4
- Sequential read up to 14349 MB/s for near-instant load times
- Sequential write up to 8957 MB/s keeps large-file workflows moving
- Random read up to 1148000 IOPS for snappy multitasking
- 600 TBW endurance rating protects heavy workloads
- PCIe 5.0 x4 interface enables Gen5 platform performance
VP14000 1TB PCIe 5.0 NVMe drive
The KingSpec VP14000 is a 1TB internal SSD in M.2 2280 form factor using 3D TLC NAND. It connects through a PCIe 5.0 x4 interface with NVMe 2.0 protocol. The drive targets AI computing, gaming and heavy-duty workstation workloads where sequential throughput matters.
Sustained workload behaviour
Sequential reads reach 14349 MBps and writes 8957 MBps while random performance hits 1148000 IOPS read and 1038000 IOPS write. An eight-channel controller and optimised firmware maintain these rates during extended AI training, content creation or DirectStorage gaming sessions. The 600TB endurance rating supports long-term heavy use.
Thermals noise and power
A graphene layer provides heat dissipation without a heatsink, keeping temperatures stable under load. Idle power draws 1W and active consumption peaks at 4.4W. The drive operates silently with no moving parts and is rated for 1000000 hours MTBF.
Høydepunkter
- Sequential read up to 14349 MB/s for near-instant load times
- Sequential write up to 8957 MB/s keeps large-file workflows moving
- Random read up to 1148000 IOPS for snappy multitasking
- 600 TBW endurance rating protects heavy workloads
- PCIe 5.0 x4 interface enables Gen5 platform performance
Spesifikasjoner
| Brand | KingSpec |
|---|---|
| Series | VP Series |
| Model | VP14000 |
| Part Number | VP14000-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 14349 MBps |
| Max Sequential Write | Up to 8957 MBps |
| 4KB Random Read | Up to 1148,000 IOPS |
| 4KB Random Write | Up to 1038,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1W |
| Power Consumption (Active) | 4.4W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Height | 2.10mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 50g |
Andre versjoner av denne modellen
2 flere i samme serie
Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.
KingSpec
KingSpec VP14000 4TB PCIe 5.0 x4 M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
463,99 USD
0.00580612BTC
På lagerSpørsmål om denne varen
How much power does the VP14000 draw when it runs continuously at full load?
Active power consumption is 4.4W. The drive ships without a heatsink, so the motherboard M.2 slot or an aftermarket cooler must handle the heat generated at that power level.
What motherboard slot and protocol are required to install this 1TB drive?
An M.2 2280 slot wired for PCIe 5.0 x4 with NVMe 2.0 support is needed. The drive is backward compatible with PCIe 4.0 slots, though sequential speeds will be limited by the slower bus.
Will the VP14000 work in a PCIe 4.0 system without firmware changes?
Yes. The drive is backward compatible with PCIe 4.0 platforms. It will operate at PCIe 4.0 speeds automatically; no firmware update is required for the drive itself.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
