Lexar
Lexar LNM790X001T-RNNNU 1TB internal SSD
M.2 2280 internal SSD with PCIe 4.0 x4 interface delivering up to 7400 MB/s read and 6500 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 7400 MBps
Capacity 1TB
- 1TB
- 2TB
Overstrøkne versjoner finnes, men er ikke på lager her.
- Up to 7400 MB/s sequential read accelerates game loads
- Up to 6500 MB/s sequential write speeds large file saves
- PCIe 4.0 x4 interface delivers high bandwidth for demanding workloads
- HMB 3.0 uses host DRAM to boost transfer responsiveness
- Single-sided M.2 2280 design fits slim laptops and PS5
Lexar NM790 1TB PCIe 4.0 NVMe SSD
The Lexar NM790 is a 1TB internal solid state drive built for gamers, professionals and creators who need fast storage. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe protocol. Sequential read speeds reach up to 7400 MBps and write speeds up to 6500 MBps. The drive is also validated for PlayStation 5 expansion.
Single-sided M.2 2280 installation
The single-sided M.2 2280 design fits directly into compatible motherboard slots or laptop bays without extra cables. No heatsink is included, so thermal performance depends on the host device’s own cooling solution. Host Memory Buffer 3.0 enables the system DRAM to assist caching for smoother transfers. Ensure the motherboard or laptop BIOS supports PCIe 4.0 NVMe drives to avoid detection issues.
1TB capacity for games and workloads
One terabyte provides room for large game libraries, creative project files and operating system drives. The 1000 TBW endurance rating supports heavy daily write workloads over the drive’s lifetime. Power draw is up to 40 percent lower than DRAM-cache Gen 4 SSDs, helping laptop battery life. When the SLC cache fills during sustained writes, speeds will drop to the native TLC rate.
Høydepunkter
- Up to 7400 MB/s sequential read accelerates game loads
- Up to 6500 MB/s sequential write speeds large file saves
- PCIe 4.0 x4 interface delivers high bandwidth for demanding workloads
- HMB 3.0 uses host DRAM to boost transfer responsiveness
- Single-sided M.2 2280 design fits slim laptops and PS5
Spesifikasjoner
| Brand | Lexar |
|---|---|
| Series | nm790 |
| Model | LNM790X001T-RNNNU |
| Part Number | LNM790X001T-RNNNU |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6500 MBps |
| HeatSink | without HeatSink |
| Fraktvekt | 0.05 kg |
| Pakkestørrelse | 165 × 102 × 15 mm |
Spørsmål om denne varen
Will this M.2 2280 drive fit in my PlayStation 5 without an extra heatsink?
The drive is confirmed compatible with PlayStation 5. It is a single-sided M.2 2280 module without a heatsink, so you will need to add a compatible heatsink before installing it in the console.
Does the 1 TB capacity provide enough endurance for heavy gaming and creative workloads?
The drive is rated for 1000 TBW, which represents a very high total bytes written figure suitable for intensive gaming, video editing and other demanding tasks.
My laptop only has a PCIe 3.0 slot — will I still see a speed benefit over my old drive?
Yes. The drive runs on PCIe 4.0 x4 but is backward compatible with PCIe 3.0 slots, where it will still deliver significantly higher sequential speeds than a typical Gen 3 SSD.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
