Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Thin black cable with SlimSAS and OCuLink connectors, .5m length

LORDWORLD

LORDWORLD MB402L-B SlimSAS 4i SFF-8654 to OCuLink 4i SFF-8611 Cable .5m

SKU CH-40BC-18XNG

A .5 m cable linking SlimSAS 8654 to OCuLink 8611 with locking latches, rated for PCIe 4.0 and SFF-9402 compliant

  • 5 m length keeps signal paths short for PCIe 4.0 speeds
  • SlimSAS SFF-8654 to OCuLink SFF-8611 connectors match spec exactly
  • Locking latch on both ends prevents accidental disconnects
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • UL 20744 certified cable meets safety requirements

SlimSAS 4i SFF-8654 to OCuLink 4i SFF-8611 Cable

This .5 metre cable connects a SlimSAS 4i SFF-8654 interface to an OCuLink 4i SFF-8611 interface. It is built to SFF-9402 compliant design specifications and supports PCIe 4.0 transfer speeds. Locking latches on both connectors provide a secure connection. The cable carries UL20744 certification for safety compliance.

Suits builders linking NVMe

This cable suits builders who need a short, certified link between compatible controller cards and backplanes or devices using the matching port types. It is not for installations requiring a longer run than .5 metres. It is also not for systems that lack either a SlimSAS 4i SFF-8654 or an OCuLink 4i SFF-8611 port.

PCIe 4.0 transfer speed over SFF-9402 compliant

The specification that decides fit is the PCIe 4.0 transfer speed supported over an SFF-9402 compliant cable assembly. Your controller and target device must both operate at this interface generation to realise the rated performance. Verify that your hardware explicitly lists compatibility with this cable standard before purchasing.

Høydepunkter

  • 5 m length keeps signal paths short for PCIe 4.0 speeds
  • SlimSAS SFF-8654 to OCuLink SFF-8611 connectors match spec exactly
  • Locking latch on both ends prevents accidental disconnects
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • UL 20744 certified cable meets safety requirements

Spesifikasjoner

BrandLORDWORLD

Spørsmål om denne varen

Which controller card slot does the SFF-8654 end of this cable plug into?

The SFF-8654 connector fits a SlimSAS 4i port on an NVMe or Tri-mode HBA/RAID card that follows the SFF-9402 pinout.

Will the 0.5 m length reach from a rear-mounted HBA to a front-panel OCuLink backplane in a standard 4U chassis?

At 19.69 inches the cable spans typical 4U depths; the locking latches on both SFF-8654 and SFF-8611 ends keep the link secure under vibration.

How can I verify the link is running at PCIe 4.0 speeds after installation?

Check the controller BIOS or OS tool (lspci -vv / nvme list) for a x4 Gen 4.0 negotiation and confirm zero CRC errors on the attached NVMe drives.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.