Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Small green development board with a 1.69 inch colour touch screen and pin headers

LORDWORLD

LORDWORLD RP2350 Development Board 1.69in Touch LCD 240×280 262K Color 6-Axis Sensor

SKU CH-ZSC9-M1QZ3

A 1.69-inch touch LCD with 240×280 resolution and 262K colour driven by a dual-core RP2350 MCU with a 6-axis sensor for IoT prototyping

  • Compact 1.69in touchscreen enables portable HMI projects
  • 240×280 pixel 262K colour display shows crisp graphics
  • RP2350 dual-core dual-architecture MCU runs Arm Cortex-M33 or Hazard3 RISC-V cores
  • 6-axis sensor adds motion tracking for interactive devices
  • C/C++, MicroPython and Arduino IDE support with full SDK speeds development

RP2350 Dual-Core Development Board

The LORDWORLD board centres on the Raspberry Pi RP2350 microcontroller, offering a choice of dual Arm Cortex-M33 cores or dual Hazard3 RISC-V cores. A 1.69 inch capacitive touch LCD with 240 by 280 pixel resolution and 262 K colour depth provides immediate visual feedback. The integrated 6-axis sensor adds motion detection for interactive prototypes. It targets makers and engineers building compact smart-device interfaces.

Touch Interface and Sensor Response

The 240 by 280 display renders menus and graphics at 262 K colours, while the capacitive layer registers touch input without mechanical buttons. The on-board 6-axis sensor supplies accelerometer and gyroscope data for orientation-aware applications. Both peripherals connect directly to the RP2350, keeping latency low during continuous polling loops. The dual-architecture MCU handles concurrent UI and sensor tasks without stalling.

Power and Software Environment Check

Verify that your development host can supply 33 mA over USB for the board and display. Confirm the toolchain you prefer — C/C++, MicroPython or Arduino IDE — is installed and updated. The board exposes the RP2350’s native USB interface, so no external debugger is required. Ensure your project can operate within the provided flash and RAM limits of the RP2350.

Høydepunkter

  • Compact 1.69in touchscreen enables portable HMI projects
  • 240×280 pixel 262K colour display shows crisp graphics
  • RP2350 dual-core dual-architecture MCU runs Arm Cortex-M33 or Hazard3 RISC-V cores
  • 6-axis sensor adds motion tracking for interactive devices
  • C/C++, MicroPython and Arduino IDE support with full SDK speeds development

Spesifikasjoner

BrandLORDWORLD

Spørsmål om denne varen

How much current does the RP2350 board draw when the 1.69 inch 240×280 touch LCD runs all day?

The RP2350 microcontroller offers dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V options, letting you optimise firmware for low-power operation while driving the 262 K colour display continuously.

Which host interface and power source must I already have to program the RP2350 development board?

A USB connection to a computer running C/C++, MicroPython or Arduino IDE is required to flash firmware and power the board during development.

Can I keep using my existing Raspberry Pi Pico add-on boards with this RP2350 Touch LCD module?

The board exposes RP2350 GPIO pins compatible with the Pico form factor, so most Pico-format HATs and sensors can be reused alongside the integrated 1.69 inch display.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.