Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Small green development board with a 1.69 inch colour touch screen and pin headers

LORDWORLD

LORDWORLD RP2350 Development Board 1.69in Touch LCD 240×280 262K Color 6-Axis Sensor

SKU CH-ZSC9-M1QZ3

A 1.69-inch touch LCD with 240×280 resolution and 262K colour driven by a dual-core RP2350 MCU with a 6-axis sensor for IoT prototyping

  • Compact 1.69in touchscreen enables portable HMI projects
  • 240×280 pixel 262K colour display shows crisp graphics
  • RP2350 dual-core dual-architecture MCU runs Arm Cortex-M33 or Hazard3 RISC-V cores
  • 6-axis sensor adds motion tracking for interactive devices
  • C/C++, MicroPython and Arduino IDE support with full SDK speeds development

RP2350 Dual-Core Development Board

The LORDWORLD board centres on the Raspberry Pi RP2350 microcontroller, offering a choice of dual Arm Cortex-M33 cores or dual Hazard3 RISC-V cores. A 1.69 inch capacitive touch LCD with 240 by 280 pixel resolution and 262 K colour depth provides immediate visual feedback. The integrated 6-axis sensor adds motion detection for interactive prototypes. It targets makers and engineers building compact smart-device interfaces.

Touch Interface and Sensor Response

The 240 by 280 display renders menus and graphics at 262 K colours, while the capacitive layer registers touch input without mechanical buttons. The on-board 6-axis sensor supplies accelerometer and gyroscope data for orientation-aware applications. Both peripherals connect directly to the RP2350, keeping latency low during continuous polling loops. The dual-architecture MCU handles concurrent UI and sensor tasks without stalling.

Power and Software Environment Check

Verify that your development host can supply 33 mA over USB for the board and display. Confirm the toolchain you prefer — C/C++, MicroPython or Arduino IDE — is installed and updated. The board exposes the RP2350’s native USB interface, so no external debugger is required. Ensure your project can operate within the provided flash and RAM limits of the RP2350.

Pontos fortes

  • Compact 1.69in touchscreen enables portable HMI projects
  • 240×280 pixel 262K colour display shows crisp graphics
  • RP2350 dual-core dual-architecture MCU runs Arm Cortex-M33 or Hazard3 RISC-V cores
  • 6-axis sensor adds motion tracking for interactive devices
  • C/C++, MicroPython and Arduino IDE support with full SDK speeds development

Especificações

BrandLORDWORLD

Perguntas sobre este artigo

How much current does the RP2350 board draw when the 1.69 inch 240×280 touch LCD runs all day?

The RP2350 microcontroller offers dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V options, letting you optimise firmware for low-power operation while driving the 262 K colour display continuously.

Which host interface and power source must I already have to program the RP2350 development board?

A USB connection to a computer running C/C++, MicroPython or Arduino IDE is required to flash firmware and power the board during development.

Can I keep using my existing Raspberry Pi Pico add-on boards with this RP2350 Touch LCD module?

The board exposes RP2350 GPIO pins compatible with the Pico form factor, so most Pico-format HATs and sensors can be reused alongside the integrated 1.69 inch display.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.