Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

myVolts

myVolts 250W AT Power Supply DPS-250AB-44B/89B

SKU CH-J4QD-BZSHV

250 W AT power supply with 24-pin, 12-pin and 8-pin connectors, compatible with Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

  • TypeAT
  • 250 W maximum output powers compatible NAS units
  • 100-240 V input accepts worldwide mains voltages
  • 24-pin, 12-pin and 8-pin connectors fit DPS-250AB-44B and DPS-250AB-89B
  • Multiple voltage rails deliver +12 V 17 A, +5 V 12 A, +3.3 V 6 A and +5 VSB 2 A
  • Direct replacement for Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

250W AT Power Supply for NAS

This 250 watt AT power supply replaces the DPS-250AB-44B and DPS-250AB-89B units in compatible Synology and QNAP network-attached storage devices. It delivers 17 amps on the 12 volt rail, 12 amps on the 5 volt rail and 6 amps on the 3.3 volt rail. The unit accepts a universal 100 to 240 volt input at 47 to 63 hertz. A 24 pin, 12 pin and 8 pin connector set is provided.

Suitable for specific Synology and QNAP models

This unit fits the Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815 and DS2015xs, plus the QNAP TS531. It is not for builders needing standard ATX pinouts, higher wattage for additional drives, or redundant power configurations. Shops requiring a different connector layout or form factor should look elsewhere.

250 watt maximum output rating

The single specification that determines compatibility is the 250 watt maximum power rating combined with the listed voltage and current outputs. Verify that the original power supply carries the DPS-250AB-44B or DPS-250AB-89B part number before ordering.

Høydepunkter

  • 250 W maximum output powers compatible NAS units
  • 100-240 V input accepts worldwide mains voltages
  • 24-pin, 12-pin and 8-pin connectors fit DPS-250AB-44B and DPS-250AB-89B
  • Multiple voltage rails deliver +12 V 17 A, +5 V 12 A, +3.3 V 6 A and +5 VSB 2 A
  • Direct replacement for Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

Spesifikasjoner

TypeAT

Spørsmål om denne varen

Does the 24-pin, 12-pin or 8-pin connector need periodic replacement?

The 24-pin, 12-pin and 8-pin connectors are fixed parts of the unit and do not require scheduled replacement.

Which output rail hits its limit first under continuous load?

The +12V rail rated at 17A is typically the first to reach its maximum during sustained operation.

How loud or hot does the supply get when running 24/7?

The unit accepts 100-240V input at 3.5A and delivers up to 250W, so heat and fan noise will reflect that continuous power draw.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.