Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Rectangular silver metal AT power supply unit with multiple cable connectors visible

myVolts

myVolts 250W AT Power Supply DPS-250AB-44B/89B

SKU CH-J4QD-BZSHV

250 W AT power supply with 24-pin, 12-pin and 8-pin connectors, compatible with Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

  • TypeAT
  • 250 W maximum output powers compatible NAS units
  • 100-240 V input accepts worldwide mains voltages
  • 24-pin, 12-pin and 8-pin connectors fit DPS-250AB-44B and DPS-250AB-89B
  • Multiple voltage rails deliver +12 V 17 A, +5 V 12 A, +3.3 V 6 A and +5 VSB 2 A
  • Direct replacement for Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

250W AT Power Supply for NAS

This 250 watt AT power supply replaces the DPS-250AB-44B and DPS-250AB-89B units in compatible Synology and QNAP network-attached storage devices. It delivers 17 amps on the 12 volt rail, 12 amps on the 5 volt rail and 6 amps on the 3.3 volt rail. The unit accepts a universal 100 to 240 volt input at 47 to 63 hertz. A 24 pin, 12 pin and 8 pin connector set is provided.

Suitable for specific Synology and QNAP models

This unit fits the Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815 and DS2015xs, plus the QNAP TS531. It is not for builders needing standard ATX pinouts, higher wattage for additional drives, or redundant power configurations. Shops requiring a different connector layout or form factor should look elsewhere.

250 watt maximum output rating

The single specification that determines compatibility is the 250 watt maximum power rating combined with the listed voltage and current outputs. Verify that the original power supply carries the DPS-250AB-44B or DPS-250AB-89B part number before ordering.

Fordele

  • 250 W maximum output powers compatible NAS units
  • 100-240 V input accepts worldwide mains voltages
  • 24-pin, 12-pin and 8-pin connectors fit DPS-250AB-44B and DPS-250AB-89B
  • Multiple voltage rails deliver +12 V 17 A, +5 V 12 A, +3.3 V 6 A and +5 VSB 2 A
  • Direct replacement for Synology DS1815+, DS1813+, DS1515+, DS1513+, DS1512+, DS1511+, DS1010+, RS814, RS815, DS2015xs and QNAP TS531

Specifikationer

TypeAT

Spørgsmål om denne vare

Does the 24-pin, 12-pin or 8-pin connector need periodic replacement?

The 24-pin, 12-pin and 8-pin connectors are fixed parts of the unit and do not require scheduled replacement.

Which output rail hits its limit first under continuous load?

The +12V rail rated at 17A is typically the first to reach its maximum during sustained operation.

How loud or hot does the supply get when running 24/7?

The unit accepts 100-240V input at 3.5A and delivers up to 250W, so heat and fan noise will reflect that continuous power draw.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.