Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Compact aluminium-alloy ATX power supply tester with 1.8 inch LCD screen and multiple connector ports

myVolts

myVolts Power Supply Tester 20/24 pin 1.8" LCD Aluminium Alloy

SKU CH-5HRQ-Z8RZN

Tests ATX, ITX and BTX power supplies across 20-pin, 24-pin, 4-pin, 6-pin, 8-pin and SATA connectors with a 1.8-inch LCD showing voltages to ±0.01 V and audible fault alarms

  • TypeAT
  • Accurate voltage readings to 0.01 V via 1.8 inch LCD
  • Durable aluminium alloy enclosure resists heat and corrosion
  • Tests 20 and 24 pin ATX plus 4 6 8 pin CPU and GPU connectors
  • Audible beep and flashing display flag faulty rails instantly
  • Powered directly from the 20 or 24 pin connector no battery needed

ATX Power Supply Tester

This myVolts unit checks ATX, ITX and BTX power supplies through 20-pin, 24-pin, 4-pin, 6-pin, 8-pin, SATA and IDE connectors. The 1.8-inch LCD shows each rail voltage with 0.01 V resolution. It is aimed at system builders and repair technicians who need quick pass-or-fail verification.

Aluminium Enclosure Thermal Behaviour

The aluminium alloy housing conducts heat away from the internal circuitry during normal operation. No active cooling is fitted, so the tester runs silently. Power is drawn solely from the supply under test via the 20/24-pin connection; no battery is required.

Bundled Accessories and Software Impact

A protective film covers the LCD screen and should be removed before first use. No software, drivers or calibration tools are included. The tester does not support hot-plug operation; all connectors must be seated before the supply is switched on.

Høydepunkter

  • Accurate voltage readings to 0.01 V via 1.8 inch LCD
  • Durable aluminium alloy enclosure resists heat and corrosion
  • Tests 20 and 24 pin ATX plus 4 6 8 pin CPU and GPU connectors
  • Audible beep and flashing display flag faulty rails instantly
  • Powered directly from the 20 or 24 pin connector no battery needed

Spesifikasjoner

TypeAT

Spørsmål om denne varen

How do I install the 20/24-pin tester and what step causes the LL alarm?

Connect the 20-pin or 24-pin ATX cable plus the 4/6/8-pin CPU cable to the matching jacks; if the CPU cable is missing the LCD shows LL and sounds an alarm.

What maintenance or replacement will this tester need later?

The unit draws power from the 20/24-pin connector and has no battery, so no periodic battery change is required.

What limit appears first during sustained testing?

The LCD reads voltages to ±0.01 V accuracy; prolonged loads that push any rail outside normal range trigger a continuous buzzer and flashing display.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.