Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Compact aluminium-alloy ATX power supply tester with 1.8 inch LCD screen and multiple connector ports

myVolts

myVolts Power Supply Tester 20/24 pin 1.8" LCD Aluminium Alloy

SKU CH-5HRQ-Z8RZN

Tests ATX, ITX and BTX power supplies across 20-pin, 24-pin, 4-pin, 6-pin, 8-pin and SATA connectors with a 1.8-inch LCD showing voltages to ±0.01 V and audible fault alarms

  • TypeAT
  • Accurate voltage readings to 0.01 V via 1.8 inch LCD
  • Durable aluminium alloy enclosure resists heat and corrosion
  • Tests 20 and 24 pin ATX plus 4 6 8 pin CPU and GPU connectors
  • Audible beep and flashing display flag faulty rails instantly
  • Powered directly from the 20 or 24 pin connector no battery needed

ATX Power Supply Tester

This myVolts unit checks ATX, ITX and BTX power supplies through 20-pin, 24-pin, 4-pin, 6-pin, 8-pin, SATA and IDE connectors. The 1.8-inch LCD shows each rail voltage with 0.01 V resolution. It is aimed at system builders and repair technicians who need quick pass-or-fail verification.

Aluminium Enclosure Thermal Behaviour

The aluminium alloy housing conducts heat away from the internal circuitry during normal operation. No active cooling is fitted, so the tester runs silently. Power is drawn solely from the supply under test via the 20/24-pin connection; no battery is required.

Bundled Accessories and Software Impact

A protective film covers the LCD screen and should be removed before first use. No software, drivers or calibration tools are included. The tester does not support hot-plug operation; all connectors must be seated before the supply is switched on.

Puntos fuertes

  • Accurate voltage readings to 0.01 V via 1.8 inch LCD
  • Durable aluminium alloy enclosure resists heat and corrosion
  • Tests 20 and 24 pin ATX plus 4 6 8 pin CPU and GPU connectors
  • Audible beep and flashing display flag faulty rails instantly
  • Powered directly from the 20 or 24 pin connector no battery needed

Especificaciones

TypeAT

Preguntas sobre este artículo

How do I install the 20/24-pin tester and what step causes the LL alarm?

Connect the 20-pin or 24-pin ATX cable plus the 4/6/8-pin CPU cable to the matching jacks; if the CPU cable is missing the LCD shows LL and sounds an alarm.

What maintenance or replacement will this tester need later?

The unit draws power from the 20/24-pin connector and has no battery, so no periodic battery change is required.

What limit appears first during sustained testing?

The LCD reads voltages to ±0.01 V accuracy; prolonged loads that push any rail outside normal range trigger a continuous buzzer and flashing display.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.