BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276571BTC
På lager
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666MHz ECC SODIMM 1Rx8 CL19 1.2V 260-pin Synology DS2422+ memory upgrade
A 16 GB DDR4 ECC SODIMM kit running at 2666 MHz with CL19 latency and 1.2 V for the Synology DS2422+ NAS
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity for critical workloads
- 16 GB dual-channel kit lifts multitasking headroom for DS2422+
- 2666 MHz DDR4 speed matches system spec for stable throughput
- CL19 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits NAS memory slots directly
Synology DS2422+ memory upgrade
This kit provides 16 GB of DDR4 ECC SODIMM memory configured as two 8 GB modules. It is built for the Synology DS2422+ NAS and targets administrators who need error-correcting memory for data-integrity workloads. The 260-pin unbuffered design matches the system’s memory slots exactly. No heat spreaders are included.
Sustained 2666 MHz operation with ECC
The modules run at DDR4 2666 (PC4-21300) with a CAS latency of 19 and a voltage of 1.20 V. ECC circuitry detects and corrects single-bit errors during continuous read and write cycles. Unbuffered topology keeps latency low while the major-brand DRAM chips maintain signal integrity under prolonged load. The 1Rx8 organisation supports stable throughput for multi-user NAS services.
Tool-free SODIMM installation
Each module inserts vertically into the DS2422+ memory slots until the side latches click. The low-profile 260-pin form factor clears the chassis cover without force. Common issues are seating the module at an angle or forgetting to power down the NAS before opening the case. Following the Synology owner’s manual avoids both problems.
Høydepunkter
- ECC protection guards data integrity for critical workloads
- 16 GB dual-channel kit lifts multitasking headroom for DS2422+
- 2666 MHz DDR4 speed matches system spec for stable throughput
- CL19 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits NAS memory slots directly
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered SODIMM |
| Part Number | MSE21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 ECC SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT |
Spørsmål om denne varen
Does the 1.20 V DDR4 2666 kit run hot or loud in a DS2422+ that operates 24/7?
The modules have no heat spreader and draw 1.20 V at DDR4 2666, so they add minimal heat and produce no noise in a continuously running DS2422+.
What must the DS2422+ already have for this 260-pin ECC SODIMM kit to work?
The DS2422+ needs free 260-pin DDR4 SODIMM slots that accept unbuffered ECC memory; the kit simply plugs into those slots.
Will the CL19 1Rx8 modules work alongside the original 8 GB stick already in my DS2422+?
Yes, the 1Rx8 CL19 2666 MHz modules are designed to run with the DS2422+ memory controller, so they operate together with the factory-installed stick.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279144BTC
På lager
