我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green circuit boards with black chips, no heat spreaders, gold edge connectors

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666MHz ECC SODIMM 1Rx8 CL19 1.2V 260-pin Synology DS2422+ memory upgrade

SKU CH-BJXW-1C4YX

A 16 GB DDR4 ECC SODIMM kit running at 2666 MHz with CL19 latency and 1.2 V for the Synology DS2422+ NAS

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity for critical workloads
  • 16 GB dual-channel kit lifts multitasking headroom for DS2422+
  • 2666 MHz DDR4 speed matches system spec for stable throughput
  • CL19 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits NAS memory slots directly

Synology DS2422+ memory upgrade

This kit provides 16 GB of DDR4 ECC SODIMM memory configured as two 8 GB modules. It is built for the Synology DS2422+ NAS and targets administrators who need error-correcting memory for data-integrity workloads. The 260-pin unbuffered design matches the system’s memory slots exactly. No heat spreaders are included.

Sustained 2666 MHz operation with ECC

The modules run at DDR4 2666 (PC4-21300) with a CAS latency of 19 and a voltage of 1.20 V. ECC circuitry detects and corrects single-bit errors during continuous read and write cycles. Unbuffered topology keeps latency low while the major-brand DRAM chips maintain signal integrity under prolonged load. The 1Rx8 organisation supports stable throughput for multi-user NAS services.

Tool-free SODIMM installation

Each module inserts vertically into the DS2422+ memory slots until the side latches click. The low-profile 260-pin form factor clears the chassis cover without force. Common issues are seating the module at an angle or forgetting to power down the NAS before opening the case. Following the Synology owner’s manual avoids both problems.

商品特色

  • ECC protection guards data integrity for critical workloads
  • 16 GB dual-channel kit lifts multitasking headroom for DS2422+
  • 2666 MHz DDR4 speed matches system spec for stable throughput
  • CL19 latency at 1.2 V keeps power draw low
  • 260-pin SODIMM form factor fits NAS memory slots directly

商品規格

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered SODIMM
Part NumberMSE21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type260-PIN DDR4 ECC SODIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT

商品問答

Does the 1.20 V DDR4 2666 kit run hot or loud in a DS2422+ that operates 24/7?

The modules have no heat spreader and draw 1.20 V at DDR4 2666, so they add minimal heat and produce no noise in a continuously running DS2422+.

What must the DS2422+ already have for this 260-pin ECC SODIMM kit to work?

The DS2422+ needs free 260-pin DDR4 SODIMM slots that accept unbuffered ECC memory; the kit simply plugs into those slots.

Will the CL19 1Rx8 modules work alongside the original 8 GB stick already in my DS2422+?

Yes, the 1Rx8 CL19 2666 MHz modules are designed to run with the DS2422+ memory controller, so they operate together with the factory-installed stick.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。