Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 2933MHz PC4-23400 CL21 1Rx8 1.2V 288-PIN ECC UDIMM memory upgrade

SKU CH-S3MN-6M138

16GB DDR4 2933MHz ECC UDIMM adds 16GB of error-correcting memory to Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 16GB

  • ECC corrects single-bit errors to prevent data corruption
  • Exact-match 16 GB DDR4-2933 CL21 1Rx8 UDIMM installs at rated speed
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • 2 V operation keeps power draw low for server stability
  • Lifetime replacement warranty with free US-based technical support

Exact-fit DDR4-2933 ECC UDIMM

This 16 GB NEMIX RAM module runs at DDR4 2933 (PC4-23400) with CL21 timing at 1.20 V. The 1Rx8 unbuffered ECC design matches the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboard requirements so the controller recognises full capacity at rated speed.

Thermals and power

Operating at standard 1.20 V without a heat spreader keeps power draw low and noise non-existent in normal use. Passive cooling is sufficient for typical server workloads on these boards.

What the kit changes

The single 288-pin UDIMM adds error-correcting memory that detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. Buyers who need registered DIMMs, SODIMMs or non-ECC modules cannot use this kit.

Høydepunkter

  • ECC corrects single-bit errors to prevent data corruption
  • Exact-match 16 GB DDR4-2933 CL21 1Rx8 UDIMM installs at rated speed
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • 2 V operation keeps power draw low for server stability
  • Lifetime replacement warranty with free US-based technical support

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-618K1
Capacity16GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How do I install the 288-pin DDR4 ECC UDIMM into the Supermicro X12SCZ-F and what step is commonly missed?

Align the notch on the module with the key in the slot, press straight down until both retention clips click, then verify the motherboard manual's required DIMM population order for the specific CPU configuration.

What maintenance or replacement will the 1Rx8 ECC memory need over its service life?

No routine maintenance is required; the module either operates correctly or is replaced if ECC logs reveal uncorrectable errors, and the lifetime replacement warranty covers such failures.

What limit appears first when the 16GB DDR4 2933MHz CL21 kit runs sustained workloads?

The JEDEC-rated 1.2V voltage and CL21 latency define the thermal and timing envelope; exceeding either requires manual overclocking beyond the validated specification.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.