NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM Kit for Supermicro X12SCQ/X12SCZ-QF
- 16GB (2 x 8GB)
- 288-Pin DDR4 UDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
16GB DDR4 2933MHz ECC UDIMM adds 16GB of error-correcting memory to Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
Size 16GB
This 16 GB NEMIX RAM module runs at DDR4 2933 (PC4-23400) with CL21 timing at 1.20 V. The 1Rx8 unbuffered ECC design matches the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboard requirements so the controller recognises full capacity at rated speed.
Operating at standard 1.20 V without a heat spreader keeps power draw low and noise non-existent in normal use. Passive cooling is sufficient for typical server workloads on these boards.
The single 288-pin UDIMM adds error-correcting memory that detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. Buyers who need registered DIMMs, SODIMMs or non-ECC modules cannot use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered UDIMM Memory |
| Part Number | ME23400-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Align the notch on the module with the key in the slot, press straight down until both retention clips click, then verify the motherboard manual's required DIMM population order for the specific CPU configuration.
No routine maintenance is required; the module either operates correctly or is replaced if ECC logs reveal uncorrectable errors, and the lifetime replacement warranty covers such failures.
The JEDEC-rated 1.2V voltage and CL21 latency define the thermal and timing envelope; exceeding either requires manual overclocking beyond the validated specification.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?