NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1Rx8 ECC RDIMM Dell Precision 5860
64GB DDR5 4800 CL40 ECC registered RDIMM kit with four 16GB modules for Dell Precision 5860 workstations
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- 64 GB capacity expands workstation memory for large datasets
- DDR5 4800 speed increases bandwidth over previous standards
- ECC registered design detects and corrects data errors automatically
- 1Rx8 organisation optimises signal integrity on Dell Precision 5860
- 1 V operation reduces power draw per module
64GB DDR5 ECC RDIMM kit
This 64GB kit contains four 16GB DDR5 registered DIMMs rated at 4800 MT/s with CL40 latency. It is built for the Dell Precision 5860 tower workstation and other DDR5 ECC registered platforms that require 1Rx8 organisation. The modules operate at 1.1V and use 288-pin connectors.
Registered design with major OEM chips
Each module is registered to reduce electrical load on the memory controller and uses Samsung, Micron or Hynix components selected by the manufacturer. The absence of a heat spreader keeps the profile low for dense server or workstation chassis. ECC circuitry corrects single-bit errors to protect data integrity in critical workloads.
DDR5 4800 speed and platform limits
The kit runs at the standard DDR5 4800 (PC5-38400) data rate; higher speeds are not supported by this module specification. Registered DIMMs cannot be used in consumer boards that accept only unbuffered memory. Capacity is fixed at 64GB across the four slots provided by the kit.
Høydepunkter
- 64 GB capacity expands workstation memory for large datasets
- DDR5 4800 speed increases bandwidth over previous standards
- ECC registered design detects and corrects data errors automatically
- 1Rx8 organisation optimises signal integrity on Dell Precision 5860
- 1 V operation reduces power draw per module
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Spørsmål om denne varen
What speed does the DDR5 4800 interface deliver in practice?
The kit runs at DDR5 4800 (PC5 38400) with CL40 latency at 1.10 V.
What physical slot and clearance does the 288-pin RDIMM need?
It fits a standard 288-pin DDR5 RDIMM slot; no heat spreader means low-profile clearance is sufficient.
How are the four 16 GB modules installed in the Dell Precision 5860, and what step is often missed?
Populate the four slots per the workstation manual, then verify ECC and registered mode are enabled in BIOS.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



