BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00275801BTC
På lager
NEMIX RAM
NEMIX RAM 768GB (8x96GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU
Eight 96 GB DDR5 registered ECC modules deliver 768 GB at 5600 MT/s with CL46 timing for the Supermicro H13DSG-O-CPU motherboard
- Capacity768GB (8 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 768 GB total capacity from eight 96 GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
- Registered ECC architecture corrects single-bit errors and supports full-slot population
- 10 V operation matches the motherboard's memory controller specification
- 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility
Exact DDR5-5600 768GB Kit for Supermicro
This 8-module kit delivers 768GB of DDR5 5600 registered ECC memory built to the Supermicro H13DSG-O-CPU motherboard's precise specifications. Each 96GB 2Rx4 RDIMM operates at 1.1V with CL46 timing so the memory controller recognises full capacity at rated speed without manual tuning.
Registered ECC stability under full population
Registered buffering offloads the memory controller allowing all eight slots to run fully populated at DDR5 5600 without signal degradation. On-die ECC corrects single-bit errors in real time preventing silent data corruption and unplanned reboots during sustained server workloads.
Replaces mismatched or partial DIMM sets
The kit eliminates the risk of mixing ranks, voltages or timings that forces the system to downclock or reject modules. The jump is worth it when moving from incomplete populations or consumer UDIMMs that lack registered buffering and ECC for this platform.
Høydepunkter
- 768 GB total capacity from eight 96 GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
- Registered ECC architecture corrects single-bit errors and supports full-slot population
- 10 V operation matches the motherboard's memory controller specification
- 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K8 |
| Capacity | 768GB (8 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
How much power does each 96 GB DDR5 5600 RDIMM draw at 1.1 V when the server runs continuously?
Each module operates at 1.10 V; total kit power depends on the platform's memory controller and workload, not on the DIMMs alone.
What motherboard slot type and population rules must the Supermicro H13DSG-O-CPU already have to accept this 8 x 96 GB kit?
The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules in an 8-DIMM population per the manual.
Will these CL46 2Rx4 registered ECC modules run at 5600 MT/s alongside slower DDR5 RDIMMs already installed in the same server?
The memory controller will downclock all populated slots to the lowest common speed and latency, so mixed speeds run at the slowest module's rate.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00278367BTC
På lager
