We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 768GB (8x96GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU

SKU CH-PHZT-FYDA8

Eight 96 GB DDR5 registered ECC modules deliver 768 GB at 5600 MT/s with CL46 timing for the Supermicro H13DSG-O-CPU motherboard

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity from eight 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 10 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

Exact DDR5-5600 768GB Kit for Supermicro

This 8-module kit delivers 768GB of DDR5 5600 registered ECC memory built to the Supermicro H13DSG-O-CPU motherboard's precise specifications. Each 96GB 2Rx4 RDIMM operates at 1.1V with CL46 timing so the memory controller recognises full capacity at rated speed without manual tuning.

Registered ECC stability under full population

Registered buffering offloads the memory controller allowing all eight slots to run fully populated at DDR5 5600 without signal degradation. On-die ECC corrects single-bit errors in real time preventing silent data corruption and unplanned reboots during sustained server workloads.

Replaces mismatched or partial DIMM sets

The kit eliminates the risk of mixing ranks, voltages or timings that forces the system to downclock or reject modules. The jump is worth it when moving from incomplete populations or consumer UDIMMs that lack registered buffering and ECC for this platform.

Highlights

  • 768 GB total capacity from eight 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 10 V operation matches the motherboard's memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-O-CPU compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How much power does each 96 GB DDR5 5600 RDIMM draw at 1.1 V when the server runs continuously?

Each module operates at 1.10 V; total kit power depends on the platform's memory controller and workload, not on the DIMMs alone.

What motherboard slot type and population rules must the Supermicro H13DSG-O-CPU already have to accept this 8 x 96 GB kit?

The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules in an 8-DIMM population per the manual.

Will these CL46 2Rx4 registered ECC modules run at 5600 MT/s alongside slower DDR5 RDIMMs already installed in the same server?

The memory controller will downclock all populated slots to the lowest common speed and latency, so mixed speeds run at the slowest module's rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.