Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

NEMIX RAM

NEMIX RAM DDR5-4800 ECC UDIMM 64GB (4×16GB) CL40 1.1V 1Rx8 memory upgrade

SKU CH-RED4-NHATE

64 GB kit of four 16 GB DDR5-4800 ECC UDIMM modules at CL40 1.1 V for Supermicro X14SAE

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • ECC corrects single-bit errors on the fly using DDR5 ECC technology
  • Exact-match DDR5-4800 kit installs at rated speed with CL40 1.1V timing
  • Four 16 GB modules deliver 64 GB total capacity in 288-pin UDIMM form
  • Verified fit for Supermicro X14SAE motherboard with 1Rx8 unbuffered layout
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5 ECC upgrade

This 64GB kit contains four 16GB DDR5-4800 modules built to the PC5-38400 standard. It targets owners of the Supermicro X14SAE motherboard who need ECC protection without registered DIMMs. The 1Rx8 unbuffered design matches the board's native memory-controller expectations.

Replaces non-ECC or slower DDR5

The kit upgrades systems running standard unbuffered DDR5 that lack error correction or operate at lower data rates. The jump is worth it when workloads demand single-bit error detection and the motherboard's qualified-vendor list includes this exact 288-pin 1.1V CL40 configuration.

Tool-free DIMM installation

Modules insert vertically into the board's 288-pin slots using the standard ejector latches; no heat-spreader clearance issues exist because the sticks are bare. What usually goes wrong is populating slots in an order the firmware does not expect, so the manual's population sequence must be followed before power-on.

Høydepunkter

  • ECC corrects single-bit errors on the fly using DDR5 ECC technology
  • Exact-match DDR5-4800 kit installs at rated speed with CL40 1.1V timing
  • Four 16 GB modules deliver 64 GB total capacity in 288-pin UDIMM form
  • Verified fit for Supermicro X14SAE motherboard with 1Rx8 unbuffered layout
  • Lifetime replacement warranty with US-based technical support included

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 288-pin DDR5 UDIMMs fit the DIMM slots on my Supermicro X14SAE motherboard?

Yes, the kit uses the 288-pin DDR5 UDIMM form factor that the X14SAE requires, not an RDIMM or SODIMM.

What is the correct order to populate the four 16 GB modules on the X14SAE board?

Consult the motherboard manual for the approved DIMM population sequence; the kit must be installed in the specific slots the manual lists for four-module configurations.

Do these ECC UDIMMs need any firmware updates or periodic reconfiguration after installation?

No firmware or reconfiguration is needed; the on-die ECC corrects single-bit errors automatically for the life of the modules.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.