Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green circuit board with black memory chips, no heat spreader, 288 gold pins visible

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 CL46 1.1V 288-PIN ECC UDIMM memory upgrade

SKU CH-GJW0-F2TQ3

16 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X14SAE-F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • Error-correcting ECC protects data integrity on the fly
  • 5600 MHz DDR5 speed matches the system controller rating
  • 1 V operation meets the motherboard voltage requirement
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F board
  • 1Rx8 unbuffered rank aligns with the board population rules

16GB DDR5-5600 ECC UDIMM

This 16 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It uses a 288-pin unbuffered ECC UDIMM form factor and a 1Rx8 rank layout built from major OEM chips. The specification matches the Supermicro X14SAE-F motherboard for full-speed recognition.

Upgrade from non-ECC or slower DDR5

Replacing non-ECC memory adds on-the-fly single-bit error correction that prevents silent data corruption and unplanned reboots. Moving from lower-speed DDR5 to the rated 5600 MHz PC5-44800 restores the bandwidth the platform expects when the board's memory controller is populated per its population rules.

Suits Supermicro X14SAE-F builders needing ECC

Builders populating a Supermicro X14SAE-F with validated unbuffered ECC UDIMMs gain the exact rank, voltage and timing the controller requires. Buyers who need registered DIMMs, SODIMMs, larger capacities per slot or non-ECC modules should look at other form factors.

Høydepunkter

  • Error-correcting ECC protects data integrity on the fly
  • 5600 MHz DDR5 speed matches the system controller rating
  • 1 V operation meets the motherboard voltage requirement
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F board
  • 1Rx8 unbuffered rank aligns with the board population rules

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does the 288-pin DDR5 UDIMM fit the Supermicro X14SAE-F motherboard slots?

Yes, the 288-pin unbuffered ECC UDIMM matches the DDR5 5600 slots on the X14SAE-F and is not an RDIMM or SODIMM.

What is the correct way to seat the 1Rx8 CL46 module so the board recognises all 16GB at 5600MHz?

Align the notch with the slot key, press straight down until both retention clips click, and follow the motherboard manual's population order for single-rank DIMMs.

Will the Samsung, Micron or Hynix chips on this ECC UDIMM need any firmware updates or periodic replacement?

No, the DRAM chips are fixed hardware; ECC corrects single-bit errors automatically and the module has no user-serviceable parts or firmware.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.