Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, no heat spreader, 288 gold pins visible

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 CL46 1.1V 288-PIN ECC UDIMM memory upgrade

SKU CH-GJW0-F2TQ3

16 GB DDR5 ECC UDIMM running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X14SAE-F motherboard

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • Error-correcting ECC protects data integrity on the fly
  • 5600 MHz DDR5 speed matches the system controller rating
  • 1 V operation meets the motherboard voltage requirement
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F board
  • 1Rx8 unbuffered rank aligns with the board population rules

16GB DDR5-5600 ECC UDIMM

This 16 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It uses a 288-pin unbuffered ECC UDIMM form factor and a 1Rx8 rank layout built from major OEM chips. The specification matches the Supermicro X14SAE-F motherboard for full-speed recognition.

Upgrade from non-ECC or slower DDR5

Replacing non-ECC memory adds on-the-fly single-bit error correction that prevents silent data corruption and unplanned reboots. Moving from lower-speed DDR5 to the rated 5600 MHz PC5-44800 restores the bandwidth the platform expects when the board's memory controller is populated per its population rules.

Suits Supermicro X14SAE-F builders needing ECC

Builders populating a Supermicro X14SAE-F with validated unbuffered ECC UDIMMs gain the exact rank, voltage and timing the controller requires. Buyers who need registered DIMMs, SODIMMs, larger capacities per slot or non-ECC modules should look at other form factors.

I korthet

  • Error-correcting ECC protects data integrity on the fly
  • 5600 MHz DDR5 speed matches the system controller rating
  • 1 V operation meets the motherboard voltage requirement
  • 288-pin UDIMM form factor fits the Supermicro X14SAE-F board
  • 1Rx8 unbuffered rank aligns with the board population rules

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 288-pin DDR5 UDIMM fit the Supermicro X14SAE-F motherboard slots?

Yes, the 288-pin unbuffered ECC UDIMM matches the DDR5 5600 slots on the X14SAE-F and is not an RDIMM or SODIMM.

What is the correct way to seat the 1Rx8 CL46 module so the board recognises all 16GB at 5600MHz?

Align the notch with the slot key, press straight down until both retention clips click, and follow the motherboard manual's population order for single-rank DIMMs.

Will the Samsung, Micron or Hynix chips on this ECC UDIMM need any firmware updates or periodic replacement?

No, the DRAM chips are fixed hardware; ECC corrects single-bit errors automatically and the module has no user-serviceable parts or firmware.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.