Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green rectangular circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 1Rx8 UDIMM memory upgrade

SKU CH-9B09-SAK2N

8GB DDR5 5600 CL46 1.10V 288-pin UDIMM validated for Supermicro X14SAE-F motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact-match DDR5-5600 upgrade for Supermicro X14SAE-F motherboard
  • 8 GB single-rank module runs at rated speed with CL46 timing
  • 10 V operation keeps power draw low for stable desktop use
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 288-pin UDIMM form factor fits the board's memory slots directly

8 GB DDR5-5600 UDIMM for Supermicro X14SAE-F

This 8 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It uses a 288-pin unbuffered non-ECC design built with major OEM chips. The single-rank 1Rx8 layout matches the memory controller expectations of the Supermicro X14SAE-F motherboard for immediate recognition at rated speed.

Who this fits and who it does not

Suitable for owners of the Supermicro X14SAE-F board needing a direct DDR5-5600 upgrade. Not for systems that require ECC registered DIMMs, SODIMM form factor, or a different DDR generation. Builders populating multiple slots should verify the board's population rules before ordering.

Deciding specification — DDR5-5600 1Rx8 CL46 1.10 V

The combination of DDR5-5600 speed, 1Rx8 rank, CL46 timing and 1.10 V voltage determines compatibility. If your platform demands different timing, voltage, rank structure or memory type, this module will not operate correctly. Check your manual for the exact memory profile required.

Høydepunkter

  • Exact-match DDR5-5600 upgrade for Supermicro X14SAE-F motherboard
  • 8 GB single-rank module runs at rated speed with CL46 timing
  • 10 V operation keeps power draw low for stable desktop use
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 288-pin UDIMM form factor fits the board's memory slots directly

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How do I install the 288-pin DDR5 UDIMM on my Supermicro X14SAE-F motherboard and what step is often missed?

Align the notch on the 288-pin DDR5 UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the module runs at DDR5 5600 CL46 1.10V. The step often missed is checking the motherboard manual for the correct DIMM population order before installing.

What maintenance or replacement will the 8GB DDR5 5600 module need over time?

The module has no heat spreader and uses major OEM chips (Samsung, Micron, Hynix) with no moving parts, so no routine maintenance is required. Replacement is only needed if a memory test reports errors or the system becomes unstable at the rated DDR5 5600 CL46 1.10V settings.

What limit appears first when the 1Rx8 DDR5 5600 memory runs under sustained load?

The primary limit is the CL46 latency at DDR5 5600 speed with 1.10V voltage; the unbuffered 1Rx8 organisation and lack of a heat spreader mean thermal throttling or timing relaxation may occur before capacity or bandwidth limits are reached.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.