Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green rectangular circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 1Rx8 UDIMM memory upgrade

SKU CH-9B09-SAK2N

8GB DDR5 5600 CL46 1.10V 288-pin UDIMM validated for Supermicro X14SAE-F motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact-match DDR5-5600 upgrade for Supermicro X14SAE-F motherboard
  • 8 GB single-rank module runs at rated speed with CL46 timing
  • 10 V operation keeps power draw low for stable desktop use
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 288-pin UDIMM form factor fits the board's memory slots directly

8 GB DDR5-5600 UDIMM for Supermicro X14SAE-F

This 8 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It uses a 288-pin unbuffered non-ECC design built with major OEM chips. The single-rank 1Rx8 layout matches the memory controller expectations of the Supermicro X14SAE-F motherboard for immediate recognition at rated speed.

Who this fits and who it does not

Suitable for owners of the Supermicro X14SAE-F board needing a direct DDR5-5600 upgrade. Not for systems that require ECC registered DIMMs, SODIMM form factor, or a different DDR generation. Builders populating multiple slots should verify the board's population rules before ordering.

Deciding specification — DDR5-5600 1Rx8 CL46 1.10 V

The combination of DDR5-5600 speed, 1Rx8 rank, CL46 timing and 1.10 V voltage determines compatibility. If your platform demands different timing, voltage, rank structure or memory type, this module will not operate correctly. Check your manual for the exact memory profile required.

Pontos fortes

  • Exact-match DDR5-5600 upgrade for Supermicro X14SAE-F motherboard
  • 8 GB single-rank module runs at rated speed with CL46 timing
  • 10 V operation keeps power draw low for stable desktop use
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 288-pin UDIMM form factor fits the board's memory slots directly

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 288-pin DDR5 UDIMM on my Supermicro X14SAE-F motherboard and what step is often missed?

Align the notch on the 288-pin DDR5 UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the module runs at DDR5 5600 CL46 1.10V. The step often missed is checking the motherboard manual for the correct DIMM population order before installing.

What maintenance or replacement will the 8GB DDR5 5600 module need over time?

The module has no heat spreader and uses major OEM chips (Samsung, Micron, Hynix) with no moving parts, so no routine maintenance is required. Replacement is only needed if a memory test reports errors or the system becomes unstable at the rated DDR5 5600 CL46 1.10V settings.

What limit appears first when the 1Rx8 DDR5 5600 memory runs under sustained load?

The primary limit is the CL46 latency at DDR5 5600 speed with 1.10V voltage; the unbuffered 1Rx8 organisation and lack of a heat spreader mean thermal throttling or timing relaxation may occur before capacity or bandwidth limits are reached.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.