Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC RDIMM memory upgrade

SKU CH-B8BG-3Z5VS

32 GB DDR3L 1600 ECC registered kit with two 16 GB 240-pin modules at 1.35 V for Supermicro A+ 2122 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects server data integrity
  • 32 GB kit (2 x 16 GB) expands Supermicro A+ 2122 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin 2Rx4 RDIMM fits Supermicro 2122TC and 2122TG
  • JEDEC and RoHS compliant for reliable long-term operation

Targeted server upgrade

This kit provides 32GB of DDR3L ECC registered memory in a matched pair of 16GB modules. It is built for Supermicro A+ Server 2122TC and 2122TG systems that require registered DIMMs with error correction. The modules will not work in standard desktop boards or alongside unbuffered memory.

Build integration

Each module uses the 240-pin DDR3L form factor and operates at 1.35V, reducing power draw compared to standard DDR3. The registered design places a buffer on the command bus, allowing the memory controller to drive larger capacities per channel. No heat spreader is fitted, so airflow across the slots must be maintained by the server chassis.

Thermals and power

At 1.35V the kit runs cooler than 1.5V DDR3, helping dense server configurations stay within thermal limits. The absence of a spreader means module temperature follows case airflow directly; adequate front-to-rear cooling is expected. Power consumption scales with the 1600MHz data rate and CL11 latency under typical workloads.

Høydepunkter

  • ECC registered design protects server data integrity
  • 32 GB kit (2 x 16 GB) expands Supermicro A+ 2122 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin 2Rx4 RDIMM fits Supermicro 2122TC and 2122TG
  • JEDEC and RoHS compliant for reliable long-term operation

Spesifikasjoner

BrandOWC
Part Number1R6T32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro A+ Server 2122TC Series
Supermicro A+ Server 2122TG Series

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Does the 1600 MHz speed limit throughput first when the server runs 24/7?

The modules run at DDR3L 1600 with CL11 latency, so bandwidth is capped at the rated 12800 MB/s per DIMM under sustained load.

How much extra heat or power do the two 16 GB sticks add during all-day operation?

Each stick operates at 1.35 V without a heat spreader, so thermal output stays low and power draw remains minimal for registered ECC DDR3L.

Which Supermicro A+ Server series must I already have for this 32 GB kit to work?

The kit is validated for Supermicro A+ Server 2122TC and 2122TG series; it requires a platform that accepts 240-pin DDR3L ECC registered DIMMs.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.