Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two black DDR5 UDIMM modules without heat spreaders, 288 pin, 32GB kit

OWC

OWC 32GB (2x16GB) DDR5 4800 CL40 1.1V desktop RAM

SKU CH-515C-HF23Z

A 32 GB dual-channel DDR5 kit with two 16 GB modules running at 4800 MT/s CL40 on 1.1 V for desktop upgrades

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with CL40 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Unbuffered 288-pin UDIMM fits standard desktop DIMM slots

32GB dual-channel DDR5 kit

This 32GB kit contains two 16GB DDR5 modules rated at 4800 MT/s with CL40 latency and a 1.1V operating voltage. It is built as a non-ECC unbuffered DIMM for desktop, workstation, NAS and all-in-one systems. The modules use a standard 288-pin layout and carry JEDEC and RoHS compliance.

DDR5 4800 standard limits

DDR5 at 4800 MT/s defines the baseline JEDEC speed for the generation; the memory controller and motherboard firmware determine whether this rate is reached automatically or requires manual configuration. CL40 is the specified CAS latency at this frequency. The 1.1V voltage is the standard DDR5 level and does not imply overclocking headroom.

Check motherboard DDR5 support

Verify that your desktop or workstation board accepts DDR5 UDIMM modules and lists 4800 MT/s in its qualified vendor list. Confirm the board has at least two DIMM slots free for dual-channel operation. Ensure the BIOS is updated to a version that recognises 16GB density modules at this speed.

Høydepunkter

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with CL40 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Unbuffered 288-pin UDIMM fits standard desktop DIMM slots

Spesifikasjoner

BrandOWC
Part Number4U8D51R8032P
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will these 288-pin modules fit my desktop motherboard?

The kit uses the standard 288-pin UDIMM form factor for DDR5 desktops; check your board manual to confirm it supports DDR5 memory.

Do I need to enable XMP or manually set timings to reach 4800 MT/s?

These modules run at JEDEC-standard 4800 MT/s CL40 1.1 V out of the box, so no XMP profile or manual tuning is required.

Can I add this 32 GB kit to the 16 GB already installed?

Mixing kits with different speeds, latencies or ranks can cause instability; for best results populate all slots with identical modules.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.