Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two black DDR5 UDIMM modules without heat spreaders, 288 pin, 32GB kit

OWC

OWC 32GB (2x16GB) DDR5 4800 CL40 1.1V desktop RAM

SKU CH-515C-HF23Z

A 32 GB dual-channel DDR5 kit with two 16 GB modules running at 4800 MT/s CL40 on 1.1 V for desktop upgrades

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with CL40 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Unbuffered 288-pin UDIMM fits standard desktop DIMM slots

32GB dual-channel DDR5 kit

This 32GB kit contains two 16GB DDR5 modules rated at 4800 MT/s with CL40 latency and a 1.1V operating voltage. It is built as a non-ECC unbuffered DIMM for desktop, workstation, NAS and all-in-one systems. The modules use a standard 288-pin layout and carry JEDEC and RoHS compliance.

DDR5 4800 standard limits

DDR5 at 4800 MT/s defines the baseline JEDEC speed for the generation; the memory controller and motherboard firmware determine whether this rate is reached automatically or requires manual configuration. CL40 is the specified CAS latency at this frequency. The 1.1V voltage is the standard DDR5 level and does not imply overclocking headroom.

Check motherboard DDR5 support

Verify that your desktop or workstation board accepts DDR5 UDIMM modules and lists 4800 MT/s in its qualified vendor list. Confirm the board has at least two DIMM slots free for dual-channel operation. Ensure the BIOS is updated to a version that recognises 16GB density modules at this speed.

Points forts

  • 32 GB total capacity from two 16 GB modules
  • DDR5 4800 speed with CL40 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Unbuffered 288-pin UDIMM fits standard desktop DIMM slots

Caractéristiques

BrandOWC
Part Number4U8D51R8032P
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will these 288-pin modules fit my desktop motherboard?

The kit uses the standard 288-pin UDIMM form factor for DDR5 desktops; check your board manual to confirm it supports DDR5 memory.

Do I need to enable XMP or manually set timings to reach 4800 MT/s?

These modules run at JEDEC-standard 4800 MT/s CL40 1.1 V out of the box, so no XMP profile or manual tuning is required.

Can I add this 32 GB kit to the 16 GB already installed?

Mixing kits with different speeds, latencies or ranks can cause instability; for best results populate all slots with identical modules.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.