Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green rectangular SODIMM module with black chips and gold contacts

OWC

OWC 8GB DDR3 1600 CL11 2Rx8 1.5V SODIMM HP EliteDesk 705 G1 Mini memory upgrade

SKU CH-J91H-8WWQV

An 8 GB DDR3 1600 SODIMM upgrade for HP EliteDesk 705 G1 Mini, 705 G2 Mini and 800 G1 Ultra-Slim

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 8GB capacity adds multitasking headroom for daily workloads
  • DDR3 1600 CL11 speed matches HP EliteDesk 705 G1 Mini specs
  • 204-pin SODIMM form factor fits 705 G2 Mini and 800 G1 Ultra-Slim
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 2Rx8 unbuffered non-ECC design installs without tools

HP EliteDesk Mini upgrade

This OWC SODIMM adds 8GB of DDR3 memory to HP EliteDesk 705 G1 Mini, 705 G2 Mini and 800 G1 Ultra-Slim systems. It is built for owners of those compact desktops who need more capacity for everyday multitasking. The module is new, unbuffered and non-ECC, matching the factory specification for the listed models.

DDR3 1600 CL11 1.5V spec

The decisive specification is the DDR3 1600 speed with CL11 latency at 1.5V on a 204-pin 2Rx8 layout. Only systems that accept this exact JEDEC-standard combination will post reliably; a different voltage, rank or latency will prevent boot. The part is 100 percent compliant and ROHS compliant, so it meets the OEM electrical and timing requirements.

Tool-free slot access

Installation is a tool-free DIY task on the supported EliteDesk Mini and Ultra-Slim chassis: open the case, align the notch on the 204-pin edge connector, press firmly until the retention clips click, then close the cover. The most common issue is inserting the module at an angle so the clips do not engage fully, which leaves the system unbootable until reseated. Mixing this stick with existing modules of a different speed or rank can also cause instability.

Høydepunkter

  • 8GB capacity adds multitasking headroom for daily workloads
  • DDR3 1600 CL11 speed matches HP EliteDesk 705 G1 Mini specs
  • 204-pin SODIMM form factor fits 705 G2 Mini and 800 G1 Ultra-Slim
  • 5V JEDEC standard voltage ensures warranty-safe operation
  • 2Rx8 unbuffered non-ECC design installs without tools

Spesifikasjoner

BrandOWC
Part Number1S6D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 705 G1 Mini
HP EliteDesk 705 G2 Mini
HP EliteDesk 800 G1 Ultra-Slim

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 1600 MHz speed actually run at 1600 MHz in my EliteDesk 705 G1 Mini?

The module is rated at 1600 MHz PC3-12800. The EliteDesk 705 G1 Mini supports DDR3-1600, so it will run at the full rated speed.

Does the 204-pin SODIMM slot in the 800 G1 Ultra-Slim accept this DDR3 module?

Yes. The 800 G1 Ultra-Slim uses 204-pin DDR3 SODIMM slots, matching this module exactly.

Will the 2Rx8 dual-rank layout fit the Mini chassis without clearance issues?

The stick is a standard low-profile SODIMM without a heat spreader, so it fits the tight Mini and Ultra-Slim chassis.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.