Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

Replace Power

Replace Power 510-P137CB ATX power supply

SKU CH-JDY7-02440

ATX power supply with 20+4 pin, +12V 4-pin, 6-pin and three SATA connectors for HP Pavilion 510-P137CB desktop

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight1
  • Ready replacement for HP Pavilion 510-P137CB desktop
  • 20+4 pin ATX connector powers the motherboard
  • +12V 4-pin connector feeds the CPU
  • Three SATA connectors run drives and peripherals
  • 6-pin power connector supports add-in cards

HP Pavilion 510-P137CB replacement

This Replace Power ATX unit is built as a direct replacement for the HP Pavilion Desktop 510-P137CB. It supplies a 20+4 pin ATX connector, a +12V 4-pin power connector, three SATA connectors and a single 6-pin power connector. The grey housing contains one fan and weighs one kilogram. It is sold new and intended for owners restoring or upgrading that specific desktop.

Suits exact HP chassis only

This supply fits builders who need a like-for-like swap inside the original HP Pavilion 510-P137CB case and wiring harness. It will not suit systems that require additional PCIe power cables, modular cabling or higher total wattage than the original design. Buyers assembling custom ATX builds or needing extra SATA or GPU connectors should look at a different unit.

Standard ATX screw pattern

Installation follows the usual four-screw ATX mounting pattern used by the Pavilion chassis. The fixed cable set means all leads must be routed before the unit is secured. The single 6-pin connector can be mistaken for a PCIe plug, so verify the device you are powering matches that pin-out. Ensure the 20+4 pin and 4-pin CPU cables reach the motherboard headers without strain.

Høydepunkter

  • Ready replacement for HP Pavilion 510-P137CB desktop
  • 20+4 pin ATX connector powers the motherboard
  • +12V 4-pin connector feeds the CPU
  • Three SATA connectors run drives and peripherals
  • 6-pin power connector supports add-in cards

Spesifikasjoner

BrandReplace Power
ColorGrey
TypeATX
Fans1
Weight1

Spørsmål om denne varen

Does my motherboard need a 20+4 pin ATX socket and a +12 V 4-pin connector for this PSU to fit?

Yes — the unit provides exactly one 20+4 pin ATX connector and one +12 V 4-pin connector, so both sockets must be present on the board.

Will the three SATA connectors and single 6-pin connector power my existing SATA drives and a legacy GPU that needs a 6-pin plug?

The PSU supplies three SATA power leads and one 6-pin lead, covering typical SATA storage and older graphics cards that draw auxiliary power through a 6-pin socket.

After installation, how can I confirm the PSU is delivering power correctly?

Switch the system on; the single internal fan should spin and the PC should complete POST, showing that the 20+4 pin, 4-pin, SATA and 6-pin rails are all live.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.