NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Replace Power
ATX power supply with 20+4 pin, +12V 4-pin, 6-pin and three SATA connectors for HP Pavilion 510-P137CB desktop
This Replace Power ATX unit is built as a direct replacement for the HP Pavilion Desktop 510-P137CB. It supplies a 20+4 pin ATX connector, a +12V 4-pin power connector, three SATA connectors and a single 6-pin power connector. The grey housing contains one fan and weighs one kilogram. It is sold new and intended for owners restoring or upgrading that specific desktop.
This supply fits builders who need a like-for-like swap inside the original HP Pavilion 510-P137CB case and wiring harness. It will not suit systems that require additional PCIe power cables, modular cabling or higher total wattage than the original design. Buyers assembling custom ATX builds or needing extra SATA or GPU connectors should look at a different unit.
Installation follows the usual four-screw ATX mounting pattern used by the Pavilion chassis. The fixed cable set means all leads must be routed before the unit is secured. The single 6-pin connector can be mistaken for a PCIe plug, so verify the device you are powering matches that pin-out. Ensure the 20+4 pin and 4-pin CPU cables reach the motherboard headers without strain.
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 1 |
Yes — the unit provides exactly one 20+4 pin ATX connector and one +12 V 4-pin connector, so both sockets must be present on the board.
The PSU supplies three SATA power leads and one 6-pin lead, covering typical SATA storage and older graphics cards that draw auxiliary power through a 6-pin socket.
Switch the system on; the single internal fan should spin and the PC should complete POST, showing that the 20+4 pin, 4-pin, SATA and 6-pin rails are all live.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?