Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Black E-ATX mid-tower case with tempered glass side panels and interchangeable mesh front panel

Thermaltake

Thermaltake CTE E600 MX Black E-ATX Mid Tower PC Case CA-1Y3-00M1WN-00

SKU CH-SD8C-H9H6M MPN CA-1Y3-00M1WN-00

E-ATX mid-tower with interchangeable mesh or glass front, 3-way floating GPU bracket, included 400 mm PCIe 4.0 riser, dual 4 mm tempered glass panels, and support for 420 mm radiators

  • TypeE-ATX Mid Tower Chassis
  • ColorBlack
  • Case MaterialSPCC
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityMini ITX (6.7" x 6.7") Micro ATX (9.6" x 9.6") ATX (12” x 9.

Options Black

  • Supports E-ATX boards up to 12 by 10.5 inches
  • 400 mm PCIe 4.0 riser cable included for vertical GPU mounting
  • 4 mm tempered glass on three sides showcases the build
  • Front I/O provides two USB 3.0 ports, one USB Type-C and audio
  • Radiator support up to 420 mm on front and right side

Centralised Thermal Efficiency Layout

The Thermaltake CTE E600 MX is an E-ATX mid-tower chassis built around a Centralised Thermal Efficiency design. It accepts Mini-ITX, Micro-ATX, ATX and E-ATX motherboards up to 12 by 10.5 inches. The package includes a three-way floating GPU mounting bracket and a 400mm PCIe 4.0 riser cable for vertical or horizontal graphics card installation.

Thermals Noise And Power Headroom

No fans are pre-installed, so acoustic and thermal performance depends entirely on the builder's choices. The case supports front radiators up to 420mm, top radiators up to 240mm and right-side radiators up to 420mm. Fan mounts accommodate 120mm or 140mm units at front, top, rear, right side and bottom locations. Maximum CPU cooler height is 166mm.

Build Quality And Daily Connectivity

The chassis uses SPCC steel with two 4mm tempered glass panels on the left and right sides and an interchangeable mesh or tempered glass front panel. Front I/O provides two USB 3.0 ports, one USB Type-C port and an HD audio jack. Storage capacity includes two internal 3.5-inch bays and two 2.5-inch bays. Seven expansion slots are available, and the bottom-mounted power supply area accepts units up to 220mm long. GPU clearance reaches 443.8mm without a right-side radiator or 415mm with one fitted.

Høydepunkter

  • Supports E-ATX boards up to 12 by 10.5 inches
  • 400 mm PCIe 4.0 riser cable included for vertical GPU mounting
  • 4 mm tempered glass on three sides showcases the build
  • Front I/O provides two USB 3.0 ports, one USB Type-C and audio
  • Radiator support up to 420 mm on front and right side

Spesifikasjoner

BrandThermaltake
SeriesCTE E600 Series
ModelCA-1Y3-00M1WN-00
TypeE-ATX Mid Tower Chassis
ColorBlack
Case MaterialSPCC
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityMini ITX (6.7" x 6.7")
Micro ATX (9.6" x 9.6")
ATX (12” x 9.6”)
E-ATX (12” x 10.5”)
Side Panel4mm Thick Tempered Glass x 2 (Front/Left/Right)
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Front Ports2 x USB 3.0, 1 x USB Type-C, 1 x Audio
Fan OptionsFront:
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2x 140mm, 1 x 140mm
Top:
2 x 120mm, 1 x 120mm
Rear:
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2x 140mm, 1 x 140mm
Right Side(In front of M/B Tray):
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2x 140mm, 1 x 140mm
Bottom(On the power cover):
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2x 140mm, 1 x 140mm
Pre-installed FansNo Fan Installed
Radiator OptionsFront:
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Top:
1 x 240mm, 1 x 120mm
Right Side(In front of M/B Tray):
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Rear:
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Bottom (DIY Only)
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Max GPU Length415mm(With radiator on the right side) / 443.8mm(Without radiator on the right side)
Max CPU Cooler Height166 mm
Max PSU Length220 mm
Dimensions22"x 10.6"x 20.2"
Weight35.27 lbs
Fraktvekt18.14 kg
Pakkestørrelse635 × 610 × 356 mm

Andre versjoner av denne modellen

1 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will an E-ATX board that measures 12 by 10.5 inches fit without blocking the front-panel connectors?

The case lists E-ATX compatibility at exactly 12 by 10.5 inches, so a board of that size mounts correctly and leaves the front USB 3.0, Type-C and audio ports accessible.

What is the longest graphics card I can install if I also mount a 360 mm radiator on the right side?

With a 360 mm radiator on the right side the maximum GPU length is 415 mm; without that radiator the limit rises to 443.8 mm.

Do I need to buy fans separately, and which sizes does the case support?

No fans are pre-installed. You can fit 120 mm or 140 mm fans in the front, top, rear, right side and bottom locations, and radiators up to 420 mm in front or on the right side.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.