Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Silver 3.5-inch bare hard drive with exposed circuit board

Western Digital

Western Digital WD5002ABYS 500GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-DXNZ-6QV3Y MPN WD5002ABYS

500 GB desktop hard drive spinning at 7200 RPM with 16 MB cache and SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity500GB
  • RPM7200 RPM
  • Cache16MB
  • Average Latency4.2ms
  • 500 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • SATA 3.0 Gb/s interface fits standard motherboard ports
  • 5 inch form factor installs in any desktop bay

RE3 enterprise drive for desktop

The Western Digital RE3 WD5002ABYS is a 3.5-inch internal hard drive built for desktop workloads. It offers 500GB of capacity on a SATA 3.0Gb/s interface with a 7200 RPM spindle speed and 16MB cache. The drive arrives as a bare unit, erased to DoD 5220.22 M standard and tested for working condition. It is sold new without formatting or partitioning applied.

Suits RAID and archive duties

This drive suits builders adding bulk storage to a desktop, a home server or a RAID array where 7200 RPM throughput matters. The 16MB cache and 4.2ms average latency support steady sequential workloads. Buyers who need a boot drive with faster random access or who require a larger single volume should look at something else. The bare-drive packaging means no cables or mounting screws are included.

SATA 3.0Gb/s interface decides fit

The single specification that decides compatibility is the SATA 3.0Gb/s interface. Your motherboard or controller must provide a standard SATA port running at 3.0Gb/s or higher to use this drive. A 3.5-inch drive bay and a SATA power connector are also required. Verify these connections before purchase.

Høydepunkter

  • 500 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 16 MB cache buffers bursts for smoother multitasking
  • SATA 3.0 Gb/s interface fits standard motherboard ports
  • 5 inch form factor installs in any desktop bay

Spesifikasjoner

BrandWestern Digital
SeriesRE3
ModelWD5002ABYS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity500GB
RPM7200 RPM
Cache16MB
Average Latency4.2ms
FeaturesErased (DoD 5220.22 M Compliant) and tested good (Not formatted, partitioned, or allocated). Sold as used and in working condition. There may be drives that have up to 50 bad sectors. There may be writing or markings on the drive or the drive may vary slightly (color and/or label may differ) from picture but the model numbers will be the same.
Form Factor3.5"
Fraktvekt0.91 kg
Pakkestørrelse147 × 102 × 25 mm

Spørsmål om denne varen

How much power and heat does the WD5002ABYS produce when running continuously?

The 7200 RPM spindle and 16 MB cache draw typical desktop 3.5" drive power; expect normal operating warmth and audible seek noise during sustained use.

What existing hardware is required to install this SATA 3.0Gb/s drive?

You need a free SATA data port on the motherboard or controller, a matching SATA power connector from the PSU, and a 3.5" drive bay or mounting bracket.

Will the WD5002ABYS work alongside an older IDE drive in the same system?

Yes, the SATA interface operates independently of legacy IDE channels; both drives can coexist if the board provides both connector types.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.