Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

A-Tech

A-Tech 16GB (2x8GB) DDR3 1866 ECC RDIMM 2Rx4 1.5V server RAM

SKU CH-CF96-P4T5B

A 16 GB dual-channel kit of DDR3 1866 ECC registered DIMMs with CL13 latency and 1.5 V operation

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit doubles capacity for heavier server workloads
  • DDR3 1866 MHz speed with CL13 latency accelerates data throughput
  • ECC registered design detects and corrects memory errors automatically
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Server ECC RDIMM kit

This A-Tech 16 GB kit contains two 8 GB DDR3 1866 MHz registered DIMMs with ECC and a dual-rank x4 organisation. It is built for servers and workstations that require registered memory and error correction for data integrity. The modules operate at the standard 1.5 V DDR3 voltage with CL13 latency. Buyers needing desktop or laptop SODIMMs cannot use this product.

Compatibility check before ordering

Verify that your system manual lists support for DDR3 240-pin registered ECC RDIMMs at 1866 MHz and that the motherboard accepts dual-rank x4 modules. Confirm the maximum capacity per slot and the supported channel population rules for your specific platform. This kit is not compatible with standard desktop or laptop computers that use unbuffered non-ECC memory.

Thermals noise and power draw

The modules run at the standard 1.5 V DDR3 voltage without additional cooling requirements beyond normal server airflow. Registered DIMMs place less electrical load on the memory controller than unbuffered equivalents at the same capacity. No moving parts are present so the kit adds no audible noise. Power draw scales with the number of populated slots and the workload intensity.

Puncte forte

  • 16 GB dual-channel kit doubles capacity for heavier server workloads
  • DDR3 1866 MHz speed with CL13 latency accelerates data throughput
  • ECC registered design detects and corrects memory errors automatically
  • 2Rx4 dual-rank organisation maximises density per DIMM slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Specificații

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-14900R
Capacity16GB (2 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the kit include two 8 GB modules or do I need to buy a second stick?

The package contains two 8 GB modules for a total of 16 GB, so no additional sticks are required.

Why is the kit labelled 2Rx4 instead of a single-rank option?

2Rx4 means each module is dual-rank with x4 chip organisation, which suits servers that need higher density per DIMM slot.

Will the CL13 latency at 1866 MHz actually improve my server throughput?

CL13 at 1866 MHz reduces cycle time compared with slower DDR3 modules, helping the server handle larger workloads more responsively.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.