Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCB DDR4 288-pin DIMM with black chips and silver contacts

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 Server Memory

SKU CH-M9A4-PCBNR

16GB DDR4 2133 ECC registered server DIMM with 2Rx4 organisation and 1.2V operation

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB capacity expands server memory headroom for larger workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 2133 MHz speed delivers 17000 MB/s bandwidth for responsive performance
  • 288-pin RDIMM form factor fits standard DDR4 server DIMM slots
  • 2 V operation reduces power draw compared with earlier DDR generations

Capacity and fit

This is a single 16GB DDR4 registered DIMM built for servers and workstations that require ECC error correction. The module runs at 2133MHz with CL15 latency at the standard 1.20V. Its 2Rx4 organisation and 288-pin form factor target multi-socket platforms where data integrity and sustained throughput matter more than low latency.

Replacement scope

The stick replaces the HP part numbers 784672-001, 726719-S21, 753221-B21, 753223-B21, 807818-B21, 810745-B21, 753221-S21, J9P83AT, 726720-S21 and 752369-081. The upgrade is worthwhile when your chassis has free DIMM slots and the firmware supports registered ECC modules at this speed rank configuration. It will not fit systems that accept only unbuffered non-ECC UDIMMs or that are limited to lower-density ranks.

Pre-purchase checks

Verify that your motherboard or server manual lists DDR4 2133 registered ECC DIMMs with a 2Rx4 layout on the qualified vendor list. Confirm the maximum supported capacity per slot and the total number of populated channels allowed by the CPU. Ensure the BIOS revision in use recognises the module part number; a mismatch can prevent the system from posting or force a lower speed.

Puncte forte

  • 16 GB capacity expands server memory headroom for larger workloads
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • DDR4 2133 MHz speed delivers 17000 MB/s bandwidth for responsive performance
  • 288-pin RDIMM form factor fits standard DDR4 server DIMM slots
  • 2 V operation reduces power draw compared with earlier DDR generations

Specificații

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

Will this 288-pin DDR4 RDIMM fit my server's DIMM slots?

This module uses the standard 288-pin DDR4 DIMM form factor, so it fits any server or workstation slot designed for DDR4 RDIMMs.

What is the correct way to seat this registered ECC module, and what step do installers often miss?

Align the notch with the slot key, press firmly until both side latches click, then verify in BIOS that the 16 GB 2Rx4 module is detected at 2133 MHz with ECC active.

Does this 1.20 V CL15 module require any periodic maintenance or scheduled replacement?

No scheduled maintenance is needed; the module is validated for continuous server operation and is covered by a lifetime warranty.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.