Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular DDR4 RDIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2666MHz CL19 ECC Registered RDIMM 1Rx4 288-Pin Server Memory

SKU CH-8B8Y-7BA3E

Adds 16 GB of DDR4 ECC registered server memory at 2666 MHz with CL19 latency

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 architecture
  • 16 GB capacity handles larger workloads on a single 288-pin module
  • Supermicro certified MEM-DR416L-CL02-ER26 validated for compatible server platforms
  • Micron MTA18ASF2G72PZ-2G6D1 chipset delivers reliable 2666 MHz operation at CL19
  • 20 V standard DDR4 voltage reduces power draw per module

Certified Supermicro Server Memory

This 16GB DDR4 RDIMM carries Supermicro certification and uses Micron chips to deliver registered ECC operation for compatible server platforms. The single-rank 1Rx4 design runs at 2666MHz with CL19 latency at the standard 1.20V DDR4 voltage. It targets administrators who need validated modules for Supermicro-qualified systems.

Registered ECC with 1Rx4 Organisation

The module implements registered ECC DDR4 in a 288-pin RDIMM form factor, providing error correction and signal buffering required by many multi-socket server boards. Its 1Rx4 single-rank layout using x4 DRAM devices determines electrical loading per channel, so the platform's memory controller must support this rank geometry and registered signalling.

Fits 288-Pin DDR4 RDIMM Slots

Installation requires motherboard slots wired for DDR4 registered DIMMs with ECC enabled in the firmware. The stick occupies one 288-pin slot and draws 1.20V, leaving remaining slots available for identical modules to populate channels per the board's population rules. Systems needing unbuffered UDIMMs or non-ECC memory cannot use this part.

Puncte forte

  • ECC protection prevents data corruption with registered DDR4 architecture
  • 16 GB capacity handles larger workloads on a single 288-pin module
  • Supermicro certified MEM-DR416L-CL02-ER26 validated for compatible server platforms
  • Micron MTA18ASF2G72PZ-2G6D1 chipset delivers reliable 2666 MHz operation at CL19
  • 20 V standard DDR4 voltage reduces power draw per module

Specificații

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR416L-CL02-ER26
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesSupermicro Certified MEM-DR416L-CL02-ER26 (MTA18ASF2G72PZ-2G6D1)

Întrebări despre acest articol

What does the 2666MHz speed mean once this module is installed in a server?

The module runs at 2666 MT/s, delivering up to 21300 MB/s of peak bandwidth per stick; actual throughput depends on the memory controller and how many channels are populated.

How does the registered ECC interface affect what the system can do?

Registered ECC adds a register between the DRAM and the memory controller, reducing electrical load so more modules can be used per channel while correcting single-bit errors in flight.

What physical slot and keying does this 288-pin RDIMM require?

It fits a standard DDR4 288-pin RDIMM socket with the registered DIMM key notch; the module will not seat in UDIMM or SO-DIMM slots.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.