Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2933 ECC RDIMM 2Rx8 server RAM

SKU CH-H4J2-FJWNH

16GB DDR4 2933 ECC registered server RDIMM with 2Rx8 layout and CL21 timing

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4 2933 ECC RDIMM expands server memory capacity
  • CL21 latency at 1.20 V keeps data flow steady
  • Registered 2Rx8 design supports multi-module stability
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Micron MTA18ASF2G72PDZ-2G9

Server memory upgrade for ECC workloads

This A-Tech module adds 16GB of DDR4 2933 ECC RDIMM capacity to compatible servers and workstations. Registered buffering and 2Rx8 organisation help maintain signal integrity on multi-DIMM channels. The CL21 latency and 1.20V operation match standard DDR4 specifications for enterprise platforms. It is sold as a single 288-pin DIMM for straightforward installation.

Replaces Micron MTA18ASF2G72PDZ-2G9 in qualified

The module is built as a compatible equivalent for that Micron part number, using major-brand chips and full quality-assurance testing. The upgrade is worthwhile when the platform supports DDR4 2933 registered ECC memory and the workload demands additional capacity or replacement of a failed stick. Verify the system's qualified-vendor list before purchase to ensure the memory controller accepts this configuration. It will not fit platforms that require unbuffered or non-ECC DIMMs.

Sustained operation at rated speed and voltage

Under continuous load the module runs at the specified 2933 MT/s and 1.20V without exceeding standard DDR4 thermal limits. Registered signalling reduces electrical loading on the memory bus, helping stability during extended multi-threaded or virtualisation workloads. ECC correction handles single-bit errors transparently, preventing data corruption over long uptimes. Performance scales with the number of populated channels as defined by the platform architecture.

Puncte forte

  • 16 GB DDR4 2933 ECC RDIMM expands server memory capacity
  • CL21 latency at 1.20 V keeps data flow steady
  • Registered 2Rx8 design supports multi-module stability
  • 288-pin DIMM fits standard DDR4 server slots
  • Tested replacement for Micron MTA18ASF2G72PDZ-2G9

Specificații

BrandA-Tech
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

What 288-pin DIMM slot and 1.20V power does this DDR4 2933 module require?

It fits a standard DDR4 288-pin RDIMM slot and runs at the DDR4 standard 1.20V; the motherboard must support registered ECC memory.

Which orientation notch and seating pressure should I use when installing this 2Rx8 RDIMM?

Align the single key notch with the slot ridge, press straight down until both side clips click — do not rock the module or force one end first.

When should I expect to replace this 16GB ECC RDIMM under normal server use?

The module carries a lifetime warranty; with adequate airflow and ECC error logging it typically lasts the useful life of the server platform.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.