Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
A green 240-pin DDR3 DIMM with black memory chips and a silver label

A-Tech

A-Tech 32GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx4 240-Pin Server Memory

SKU CH-JDHG-7STAK

32 GB DDR3 ECC registered server DIMM running at 1066 MHz with CL3 latency and 1.5 V operation

  • Capacity32GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity expands server memory headroom for heavier workloads
  • DDR3 1066 MHz PC3-8500 speed matches Hynix HMT84GR7MMR4C-G7 specification
  • ECC registered design detects and corrects data errors for reliability
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 registered memory slots

Server DDR3 32GB ECC RDIMM

This 32GB DDR3 module runs at 1066MHz (PC3-8500) with a CL3 latency and 1.5V operation. It is a registered ECC DIMM built with a 4Rx4 organisation for server and workstation platforms. The 240-pin form factor fits DDR3 DIMM slots in compatible systems. It serves as a direct replacement for the Hynix HMT84GR7MMR4C-G7 part.

4Rx4 registered design impact

The 4Rx4 rank structure increases memory density per slot, allowing higher total capacity in systems with limited DIMM sockets. Registered buffering reduces electrical load on the memory controller, which helps stability when multiple modules are populated. ECC capability detects and corrects single-bit errors to protect data integrity in critical workloads.

DDR3 slot and platform check

Verify that your motherboard or server chassis supports DDR3 RDIMM modules at 1066MHz with 4Rx4 ranking and 1.5V voltage. Confirm the maximum supported capacity per slot and total system limit in the vendor documentation. Ensure the BIOS or firmware is current enough to recognise high-density registered ECC DIMMs before installation.

Puncte forte

  • 32 GB capacity expands server memory headroom for heavier workloads
  • DDR3 1066 MHz PC3-8500 speed matches Hynix HMT84GR7MMR4C-G7 specification
  • ECC registered design detects and corrects data errors for reliability
  • 50 V standard DDR3 voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 registered memory slots

Specificații

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT84GR7MMR4C-G7
Capacity32GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesHMT84GR7MMR4C-G7

Întrebări despre acest articol

Will the registered ECC module require any periodic maintenance or component replacement during its service life?

The module has no moving parts or user-serviceable components, so no scheduled maintenance or replacement is needed under normal operation.

What electrical or thermal limit is reached first when the DIMM runs continuously at 1.5 V and 1066 MHz?

The 1.5 V supply rail and the registered buffer's current rating set the primary electrical ceiling; thermal limits follow the system's airflow design.

How much heat and acoustic output should I expect from this 32 GB DDR3 RDIMM in a 24-hour server workload?

The module itself is silent and its power draw at 1.5 V is modest; total heat and noise depend on the chassis cooling and other installed components.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.