Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board DDR3 memory module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 2Rx8 HP 708633-B21 712287-071 715270-001 Server Memory

SKU CH-QG7A-NPN3V

4GB DDR3 1866 ECC unbuffered DIMM for HP 708633-B21, 712287-071, 715270-001 servers

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB DDR3 1866MHz ECC UDIMM boosts server responsiveness
  • CL13 CAS latency with 1.50V standard voltage for stable operation
  • 2Rx8 dual-rank unbuffered design increases memory throughput
  • 240-pin DIMM form factor fits HP 708633, 712287, 715270 systems
  • Major-brand chips tested for reliable server workload performance

4GB DDR3 1866 ECC UDIMM for HP Servers

This 4GB DDR3 1866MHz PC3-14900 ECC UDIMM module uses a 240-pin DIMM form factor and operates at 1.5V with CL13 latency. It is built with major-brand chips in a 2Rx8 configuration for server and workstation systems.

Check DDR3 ECC UDIMM support and HP part numbers

Verify that your motherboard accepts DDR3 ECC unbuffered DIMMs at 1866MHz and 1.5V before ordering. This module replaces HP part numbers 708633-B21, 712287-071 and 715270-001, so cross-reference your system’s qualified-vendor list.

Standard-voltage DDR3 thermals and power draw

At 1.5V the module runs at standard DDR3 voltage, so power consumption and heat output are typical for unbuffered server memory. No active cooling is required beyond normal chassis airflow, and acoustic impact is negligible in normal operation.

Puncte forte

  • 4GB DDR3 1866MHz ECC UDIMM boosts server responsiveness
  • CL13 CAS latency with 1.50V standard voltage for stable operation
  • 2Rx8 dual-rank unbuffered design increases memory throughput
  • 240-pin DIMM form factor fits HP 708633, 712287, 715270 systems
  • Major-brand chips tested for reliable server workload performance

Specificații

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

What comes in the box and do I need anything else to install this 240-pin DDR3 module?

The package contains one 4GB DDR3 1866 ECC UDIMM. No extra cables or brackets are required; the module plugs directly into a compatible 240-pin motherboard slot.

How do I choose between the listed HP part numbers 708633-B21, 712287-071 and 715270-001?

All three part numbers reference the same 4GB DDR3 1866 ECC UDIMM specification. Select the number that matches your server's service manual or the label on the module you are replacing.

What does the PC3-14900 rating mean for real-world server performance?

PC3-14900 indicates a peak transfer rate of 14,900 MB/s at 1866 MHz with CL13 latency, giving noticeably faster data throughput than lower-speed DDR3 modules in compatible platforms.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.