Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3 ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1866MHz ECC RDIMM 2Rx8 for IBM-Lenovo 00D5028 46W0688 Server Memory

SKU CH-AQCJ-EVMDT

4GB DDR3 1866MHz ECC registered server memory module with CL13 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1866MHz PC3-14900 speed accelerates data throughput
  • ECC registered design detects and corrects memory errors automatically
  • 2Rx8 organisation with major-brand chips ensures stable operation
  • 240-pin DIMM at 1.5V fits compatible IBM-Lenovo systems

Server Memory Module

This A-Tech module is a 4GB DDR3 1866MHz ECC RDIMM built for IBM-Lenovo part numbers 00D5028 and 46W0688. It targets administrators upgrading or repairing compatible server and workstation platforms that require registered memory with error correction.

Build Integration

The stick uses a standard 240-pin DIMM form factor and runs at the DDR3 standard voltage of 1.50V with CL13 latency. Its registered design places a buffer between the module and the memory controller, reducing electrical load so larger memory populations remain stable. The 2Rx8 organisation fits two ranks into a single slot, freeing additional DIMM positions for further capacity expansion.

Suitability

This module suits IT teams maintaining legacy DDR3 infrastructure where ECC and registered operation are mandatory for data integrity. It is not appropriate for systems that accept only unbuffered UDIMMs, for platforms limited to lower DDR3 speeds, or for builds that require higher-density modules beyond the 4GB single-stick capacity.

Puncte forte

  • 4GB capacity expands server memory headroom for heavier workloads
  • DDR3 1866MHz PC3-14900 speed accelerates data throughput
  • ECC registered design detects and corrects memory errors automatically
  • 2Rx8 organisation with major-brand chips ensures stable operation
  • 240-pin DIMM at 1.5V fits compatible IBM-Lenovo systems

Specificații

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

Does the CL13 latency become a bottleneck during sustained server workloads?

CL13 is the rated CAS latency for this DDR3 1866 module; sustained throughput depends on the platform's memory controller and how many ranks are populated per channel.

How much heat does a registered 1.5 V DDR3 DIMM produce when running continuously?

Registered DDR3 at 1.5 V typically stays within standard JEDEC thermal limits; adequate chassis airflow is recommended for 24/7 operation.

Which motherboard slot and chipset combination is required for this 240-pin ECC RDIMM?

This module fits a DDR3 240-pin RDIMM slot on a server or workstation board that supports ECC registered memory; verify the system's qualified vendor list before installing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.